Models > MDB6601AWW > Instructions

MDB6601AWW Maytag Dishwasher - Instructions

All installation instructions for MDB6601AWW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MDB6601AWW
1-15 of 872
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The utensil basket was old, bowed and the bottom was falling out.

  • Customer: Janet from Plano TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 371 of 375 people found this instruction helpful
I ordered a new replacement basket. The new one is a little different but it fits in the same place and takes up the same amount of room in the dishwasher. It looks very nice too.

door would not open

  • Customer: jeff from strongsville OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 368 of 369 people found this instruction helpful
remove torq scew from edge of inside of door and seperate plastic inner panel from out steel and then pull up on plastci unscrew 2 screw securing handle and reverse to assemble. Anyone can door this in under 10 mins.

2 broken wheels on basket

  • Customer: jeanne from waynesboro TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 362 of 364 people found this instruction helpful
unwrapped wheels ,pulled out drawer and easily put on new wheels...as we live way out in the boonies it was great to be able to order parts and have them delivered so fast...easy to fix....

Door handle broke but dishwasher still works

  • Customer: Wendy from W Melbourne FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 196 of 263 people found this instruction helpful
For probably a year I have been using my dishwasher with a broken handle. I would just pull the door out with a little bit of force to open it. Still I was concerned it would eventually break something else. After reading other people's experience with replacing it, it didn't sound like such a difficult repair and the part was less than 30 dollars counting shipping. Incidently, PartSelect ships fast so make sure you order the right part. I ordered the part Friday afternoon and got it the next day! And I didn't use overnight shipping. Sweet!
Here are the steps for repair.
1) Turned off power to dishwasher.
2) Removed all the screws on the inside of the door then shifted the panel over so I could get to the top.
3) The bottom of the latch assembly attaches to the control panel with two flimsy plastic notches and at the top with two of the screws that hold that back panel in place. (For me, I found that those flimsy notches had broken. I was concerned that I would have to buy a whole new control panel which was ~175.00 dollars. Yikes! Luckily the two screws at the top and the door panel behind it seem to be holding it in place.)
4) There are two pairs of metal prongs that plug into a white connectors on either side of the latch assembly. I had to use pliers to pinch the metal prongs together while wiggling the connector get it unplugged. This was the hardest part. (It would have been easier to just reuse the same metal plugs. Someone else did that and it seemed to work.) Be sure to note which side of the latch assemply the two connectors was plugged in to.
5) Plug the 2 white connectors to the new latch assembly.
6) Lay the latch assembly in place on the door.
7) Put the back panel down over it and screw it in place.
8) Turn on power.

Works perfectly!

Maytag makes a really crappy silverware basket. The bottom of ours fell apart the first year.

  • Customer: Kenneth from Houston TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 132 of 199 people found this instruction helpful
There was no repair to be done. Just replaced the defective basket with the new one.
I got the part two days after ordering it. Great service.

The bottom of our dishwasher's old utinsel basket broke out

  • Customer: Wade from Seattle WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 92 of 93 people found this instruction helpful
It was so easy to find the right part on the PartsSelect website. I just had to enter the manufacturer (Maytag) and model number and up popped skematics of all the parts available. I just clicked on the drawing of the basket and placed the order. It took less that 5 minutes. The part arrived 4 days later as promised. The repair took even less time than teh ordering. I simply took the old basket out and dropped in the new one.

I'm just happy to know there is a place that has such a user friendly website and stocks so many parts for older appliances. I had my house built in 1992 and several of the appliance are original. Fortunately I always keep the owners manuals for every piece of equipment so the model and serial numbers are readily available.

Didn't spray water.

  • Customer: Joseph from Merrill WI
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 113 of 178 people found this instruction helpful
Inside the Dishwasher on the bottom of unit, I removed the dish cart. The removed the sprayer arm with an adjustable wrench on the plastic nut on the center top. Then removed the top three screws with a Torx 20 screw driver and removed the plastic cover, then removed the single screw above the black plastic water pump piece and took it off. Then removed the six additional screws that were then displated after the previous cover was exposed. Finally I unscrewed the ivory colored plastic shaft which holds the food processor blade from the metal motor shaft with a adjustable wrench. Upon inspecting the ivory plastic shaft I noticed that the threads were stripped inside it. Which means it didn't turn when the motor would turn and wouldn't drive the water pump.

I ordered the replacements and noticed that the replacement for the plastic ivory colored shaft was a metal shaft. It had new pieces as the food processor blade had notiches in new places. The kid had all the replacement parts and a good set of instructions for what to replace and where it would go.

Then I assembled the washer as I had taken it apart. And it worked perfectly the first time. It has been repaired and working for a few weeks now without incident.

Door latch was broken -

  • Customer: John from Loveland OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 80 of 80 people found this instruction helpful
1.Turn of electric
2. Open dishwasher door
3. Remove scres for interior door cover
4. Lift and move the interior door cover to right
5. Use Pliers to pull off connectors of Latch
6. Use Pliers to attach replacement latch
7. Lay interior door cover back on door and line up with screw holes. Make sure you have the bottom lip over the bottom of exterior door by hinges. Bottom lip goes inside the dishwasher.
8. Put back in screws - not all the way and tighten snug (do not over tighen) once all are in place.
9. turn on power.
10. Done!

30 Minutes tops!

BROKEN WHEELS

  • Customer: Mary J. from Westwood MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 64 of 64 people found this instruction helpful
SNAPPED ON NEW WHEELS

The latch handle broke

  • Customer: Robert from East Hartford CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 95 of 157 people found this instruction helpful
Had this problem before and the part was simply a plastic latch which cost less than 5 dollars. That part has been discontinued and the latch is now the entire assembly. Although the part costs more, the repair is much simpler. Remove the screws from the inside of the door. Have to use hex nut screwdriver. Remove the panel and the assembly is right at the top. Unhook the assembly from the two (2) prongs. TURN OFF the electricity or touching the prong will bite you. Had to pry the latches off the prongs with a screwdriver as the fit is tight. Latch the new assembly on and rescrew the door panel and the job is done. Very easy and cheaper than a repairman coming out and charging $150.00

worn out silverware basket

  • Customer: Dayna from Logan UT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 95 of 158 people found this instruction helpful
Ordered replacement basket online at much better price than available localy. When I recieved it discovered that it did not include the handle, but was suprised to see it labeled as "Genuine Maytag Parts" ( I realy expected a knock-off replacement part for the price difference). I was able to remove tha handle from the old basket and install it on the new one. Job done. No problem

dishwasher door leaks

  • Customer: jerry from vernon CT
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 53 of 57 people found this instruction helpful
I ordered and replaced both the door gasket (easy) and inner door seal (difficult) to try and correct a leak during operation. The door gasket was easily replaced. However, the inner door seal was a bit more trouble. After removing the inner door I found that the old inner seal needed to be removed and surfaces thoroughly cleaned of old build-up of dishwasher soap residue, in order to allow the sticky back tape side of door seal to properly stick to the door. There also was a plastic cover over the wire bundle that needed to be cleaned. The inner door seal was the exact length, so proper positioning of the sticky back was very important.
Upon reassemly the leak still existed and I was unable to correct the leak. Further inspection indicated that the basic tub/body of the dishwasher might be slightly distorted due to age and may not create seal with door seal as originally designed.
I guess I need to find a new dishwasher, at this point.
A word to the wise: Check to see if the tub/body is still in good condition.

Supports for middle rack of dishwasher broke

  • Customer: Jesse from San Jose CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 51 of 58 people found this instruction helpful
The middle (plates and silverware) rack of my maytag dishwasher broke. The supports for the wheels were plastic hubs that bore the weight of the rack.

About a year after owning the dishwasher, the front two plastic wheel hubs that support the rack broke.

I ordered the left and right Rack Adjuster Assembly which included the main T shaped support rail including the two wheels. The good news is that these hubs are METAL which should not break like the weak plastic hubs of the previous version.

I removed about 4-5 screws from the original assembly, and installed the new rack adjuster assembly and replaced the screws. About 20 minutes total for both sides.

I also replaced the tracks since mine were somewhat bent after the original supports broke.

Very nice to have a fully operational / sturdy middle rack again on this dishwasher.

One of two plastic rollers on this metal part broke (twice)

  • Customer: Jim from Hendersonville TN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 46 of 46 people found this instruction helpful
Remove the entire top dish rack by removing the two front covers on the left and right metal grooved slides. The covers are plastic. No tools are required. After removing the top dish rack, the rack adjuster (with two cheap plastic wheels) is easily removed with an allen wrench. There are six fasteners that must be removed to detach the rack adjuster from the rack.

If only 1 of the 2 cheap plastic wheels on this assembly is broken, do not throw away the old assembly. The functional plastic wheel can be removed and saved for the next time one breaks!!! This cheap plastic wheel cannot be purchased separately from the entire rack adjuster assembly.

Maytag quiet series 300 stopped cleaning

  • Customer: mike from woodland hills CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 48 of 54 people found this instruction helpful
Remove the racks top and bottom. The Station D seals are at the far back on the tube that supplies water to the top and middle spray heads. Unsnap the old one and snap in the new - it only goes one way! This will repair the seal aroound the tube that supplies the middle sprayer and restore pressure to all 3 heads. Repalcing the screen accumulator is harder. you need a torx driver. remove the little thumb nut on the bottom sprayer and remove the sprayer. Then remove the tube where you just replaced the D station. (You of course could have done this earlier if you were doing both repairs) then 6 screws on the impeller housing. Now remove the 1 torx screw on the impeller and pull the impeller up and off. Remove the 3 screws on the cover and 2 screws on the accumulator. Clean all the old food scraps that are clogging up the works and reassemble in reverse order. Washer is working again!!
All Instructions for the MDB6601AWW
1-15 of 872