Models > MDB6600AWW > Instructions

MDB6600AWW Maytag Dishwasher - Instructions

All installation instructions for MDB6600AWW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MDB6600AWW
766-780 of 805
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door latch handle failed

  • Customer: Roberto from Cedar Falls IA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Install complete latch and handle assembly. Remove panel, disconnect wiring and install the assembly

No water

  • Customer: Richard from NEW WINDSOR NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set, Wrench set
  • 0 of 0 people found this instruction helpful
Removed lower covers.Unplugged wires to valve.Removed hot water supply to valve.Removed two bolts holding valve to bottom of tub,removed hose(lossen hose clamp).Remove elbow from old valve,install on new.Connect both hoses to valve,reinstall valve(two bolts),plug in wires.Start up check for leaks,works great!!!!!!!!!!

Dishes were not getting clean

  • Customer: Michael from Buttw MT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Thank You PartSelect for making this repair project simple and stress free. The exploded diagram of the appliance was clear and consise. The parts list was very helpfull. Showing me which parts were the most replaced gave me the confidence to order, reducing the prospect of having to return items ( always a pain point ). Parts arrived in just a few days. Followed the instructions on the video. Dishwasher was back in operation in no time and passed an overly thourgh dish inspection. Your site is amazing and is on my favorites tool bar. Thanks Agian !!!

Door latch broken

  • Customer: Gregory from California City CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Unplugged power cable,removed inside door panel - 10 screws. Using large flathead screwdriver, removed connectors from latch assembly and reconnected plugs on new assembly, reinstalled door panel and plugged power cable.

The door latch keeps breaking. This is the second one we have put on. The dishwasher is 7 yrs old.

  • Customer: doris from harrisonville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
My husband put it on. It was pretty simple as this is the second time.

Plastic latch broken into two pieces preventing the dishwasher from closing or opening (it was free to do either) and green "wash complete" light remained on

  • Customer: Dianne from Seattle WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
After ordering the latch handle replacement part, and before I received it, I continued using the dishwasher by placing a chair against the dishwasher door to prevent it opening during the wash cycle. Once started, no automatic "off" would allow you to add more dirty dishes. I placed a towel along the bottom edge to collect any drips, but they were extremely minimal. Once the part arrived, I removed the screws holding the inside plastic lining of the door and noted how the old latch part attached. The old part had to be unplugged which, in theory, looked quite easy, but the prongs of the plug were very, very tight and using much more force than I expected to use, and prying with a pair of pliers, the plug came free. The new part simply was plugged in, white plug matching white and black plug matching black. The latch was held in place with two of the door lining screws used to replace the inner door liner. OK, that seemed too simple--I did not expect it to completely work, but it did. The lighting and automatic off when the door was opened and everything worked just perfect. YEA!

The door handle was broken

  • Customer: Barry from VA Beach VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I opened the door, removed the screws from around the side of the door. Lifted out the old and broken door latch assembly, pulled off the two sets of connecting wires and then reversed the process with the new latch assembly. Done PS, I did this while sitting on a kitchen chair.

water leak at right front coner

  • Customer: NORMAN from BRYAN TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Socket set
  • 0 of 0 people found this instruction helpful
pulled dishwasher out to see where the leak was comming from . after seeing where it was leaking i searched for parts for jenn-air diahwasher. that when i read about the reviews on how to replace the float switch. it was very helpfull in being able to do the work myself and not having to pay a repairman.

Broken dishwasher basket.

  • Customer: John from Darien CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Threw out the old broken one and this fit perfectly!

I got my parts from you

  • Customer: Angela from Whitehall WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I haven't gotten to our rental to get the job done yet but it should go real easy because the broken one came off real easy these should go on just as easy. Thanks again for the parts

The bottom grid of the silverware basket separated.

  • Customer: Irene from Holmdel NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just ordered a new one, which came VERY quickly, and put it in!

The dishwasher door was fitted with a plastic striker. It obviously wasn't meant to last, and eventually broke. This meant that the door would not shut properly, so I couldn't use the dishwasher.

  • Customer: Judi from Katy TX
  • Difficulty: Really easy
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I pulled out the dishwasher a little to expose the screw on the striker, (located on top of the dishwasher. The annoying thing was, it wasn't a regular screw, so unfortunately I had to go out and buy a torx screwdriver (which cost more than the new striker). It would have been so much quicker, and cost effective, if it had been a normal screw. Anyway, I completed the job and pushed the dishwasher back into place.

leaking water

  • Customer: Edgar from Round Lake IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
I removed the leaking valve and installed the new one it was pretty easy

plastic door latch broke.

  • Customer: Jerome from Festus MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed the torx screws on the inside door panel. Un pluged the wires to the two swithes to the latch,removed the latch. Installed new latch and reconnect the wires. Screw panel back on door.

Broken Handle

  • Customer: JOHN from DAVISON MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed 8-10 screws, unplugged switches and reinstalled everything. It was a snap. Thanks for the quick response with parts shipment.
All Instructions for the MDB6600AWW
766-780 of 805