Models > MDB6600AWW > Instructions

MDB6600AWW Maytag Dishwasher - Instructions

All installation instructions for MDB6600AWW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MDB6600AWW
721-735 of 805
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

poor water flow into the dishwasher

  • Customer: kevin from crystal lake IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Replaced the valve from the side. Easy and quick. The program to identify the part is excellent. The big concern is getting the right part.

The dishwasher stopped receiving water

  • Customer: Donald B from Orem UT
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Wrench set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
I went online and determined what the possible dishwasher parts would cause no water entering. The most recommended part was a valve. I ordered it and afterword obtained a ohmmeter and determined the part in my washer was not faulty. It tested the same as the new part I sent for. The real problem was the connecting metal flex hose that I had installed when I put it in. It had a valve built in that prevents water to flood the kitchen if the hose becomes broke. Even though I tested it out and found water flowing through it, the valve when under pressure had gotten plugged up with dirt particles that caused it to malfunction. I changed the hose and Wa La everything worked fine. I in fact did not have to change the so-called faulty valve. I suggest a detailed evaluation of the problem before purchasing parts. With electrical components it is practically impossible to know if they are faulty without an ohmmeter. Some valves become stuck and if unplugged then plugged back in they will reset themselves. I suggest that if one does not know what they are doing, refrain from messing with electrical parts. Don J.

Water was only filling once in a while with water

  • Customer: Timothy from WHITE CLOUD MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
my dishwasher is located in a island so i pulled the paneling off the back & the covers off the bottom of the dishwasher. my water shut off is under the dishwasher. i shut it off unhooked the water line at the union shut off the electric, unpluged the valve, pulled 4 screws out of the valve bracket , slide the clamp off the hose and removed the hose from the valve took the valve unit out removed the water line from the old valve put it on the new valve reassembled it turned water on checked for leaks turned the electric on and tried it out.

Very little water getting into the machine, would not clean .

  • Customer: john from crisfield MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
First turn off power and water then Removed the two screws on the bottom plate, took the plate off. To remove the valve , I took one screw out of the bracket and just loosened the other,Pulled the valve out ,removed the water lines,then reused existing brass connection, put the hoses on the new valve then put it back together .Turned the water on checked for leaks, then closed it up..Turned the power on and it works great.....

door wasn't latching and started its cycle before door was shut

  • Customer: Randall V from Loveland OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just followed another persons directions that was in the system already. He had a great idea by taking the new switches out of the new latch and replacing them with the old ones from the bad latch. The old switches are still good and it made for a simple repair. This way you didn't have to disconnect the wire from the switches and now you have two new switches on hand. The old switch had a burnt spot on the connector.

The dishwasher door latch was broken and would not hold the door closed.

  • Customer: Ruth from Canyon Lake CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I unplugged the dishwasher under the sink. I opened the dishwasher up and took out the 12 screws holding the inside door facing on. I gently moved the door facing down towards the dishwasher to reveal the door locking mechanism at the top of the door. I unplugged the mechanism and plugged in the new one. I put the door back together the same way I had taken it apart. In all it took about 12 minutes. Works like a charm.

knives had cut the plastic on the racks and rust encroached in the racks.

  • Customer: April from Hopedale MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
slide old racks out and slide new racks in

Upper and lower racks had broken and rusting prongs.

  • Customer: Edith from Lancaster PA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed old racks -- easy. New lower rack slid right into proper position. Upper rack -- had to unclip the rotating water supplier from underside of old rack and position it on the underside of the new rack, carefully noting the removal process to facilitate re-placing the water supplier onto the new rack. No tools needed -- very easy. New upper rack slid right back into proper position.

Lower Dishrack began to show areas of rust.

  • Customer: Garry C from Yucca Valley CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I simply removed old lower dishrack from dishwasher and discarded. Then I removed new lower dishrack from box and installed it into dishwasher, no tools necessary. How easy is that?! New lower dishrack is a perfect replacement and now our dishwasher is good to go. Thank you PartSelect for your fast service.

Dishwasher not drying dishes water not hot

  • Customer: Joseph from San diego CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Removed dishwasher unplugged heating element wires unscrewed nuts removed old element replaced with new one. Tightened nuts snapped wire connecters back reset dishwasher ran quick cycle hot steam and dry dishes.Thanks Joe (saved me 1,500 for a new one)

Mice living behind the dishwasher

  • Customer: julie from golden CO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Mice were living behind and on top of the dishwasher and destroyed the pad. Had to throw it away. Ordering you was easy, and the pad fit perfectly.

Normal wash cycle would start, run for 20 seconds, then pause and repeat 3 times then stop all together. Other wash cycle buttone were inactive ion the control panel

  • Customer: Eric from Newton WI
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Opened the door, removed the 11 screws (torks) holding the inside door panel on, lifted the panel and took a pic of the wiring connections for reassembly, then disconnected about 5 wire harnesses between the doors and on the control board, set inner door panel aside. Removed three hex head screws on control panel, depressed tabs holding circuit board in place, replaced with new panel and reassembled. The other parts were just snap on inside the dishwasher except for the inlet which is for future replacement as my lower sprayer arm is still functioning but is wearing out. Now the problem is fixed, and all buttons on the control panel function as well

Mis-installed pump seal (motor gasket) from factory.

  • Customer: Edward from Greenleaf WI
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Dissassembled dishwasher, replaced gasket and reassembled dishwasher.

broken door latch

  • Customer: Donald from St. Pete Beach FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed door frame screws. Pulled front panel from frame. Removed white plug,than removed black plug. Switch was tnan loose removed and replaced with new. Pushed door together and replced screws. Successful repair. Thank You!

latch handle on dishwasher was broken

  • Customer: Loren from Fulda MN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I used a screwdriver with a torque bit and took off the inner door panel. Move the panel to the right side (as you face the dishwasher). Disconnect the two wire connnectors with a needle nose plier and discard the handle and connections. Install the new latch by making sure you attach the wires to the proper connectors. Make sure the connectors 'snap' in place. Place handle in proper slot and replace the inner door panel making sure that the two small flaps on the bottom of the inner door panel go inside the dishwasher (they cover the hinges). Tighten the screws and you are done!
All Instructions for the MDB6600AWW
721-735 of 805