MDB6600AWW Maytag Dishwasher - Instructions

Removed screws and front cover, disconnected 2 plugs and replaced. There were 2 broken clips on door, replaced part anyway. Part works, we will see how long.
Remember how you unplug the connectors.

I took out the old basket and dropped in the new! Easiest repair of my lifetime. Thanks. :)

Replase door lach Thang you for the fast respons Peter Hansen

A piece of cake!! Anyone can do this. The most time consuming part was determining which breaker to shut off as mine are not labeled. Very straight forward repair especially with help from this site.

Saveing some money, found part, it came in three days, putting it in was real easy. The black wires are hot,please turn off elec. Before you start. (Boy it stings, if you forget) I feel I saved about $100. 00 By doing it,

It was so easy I just removed 10 screws and removed 2 wire clips and pulled out the old handle and the replaced the new one. I have no idea how much I saved but I would guess close to a hundred bucks. Thanks PartSelect.

New part came all as one assembly, reconnected the elec wire hubs - it was all quite simple.
The part arrived even a couple days early.

Instead of just buying a handle, you can purchase the entire latch assembly. Check your dishwasher door to see if you require a torx screw driver. If you don't have one, consider buying a folding set so you will have numerous sizes for future repairs on other items. Turn off the breaker to the dishwasher. Use a torx screw driver or bits to remove the inner cover of the dish washer door. Then unplug the leads on either side of the assembly. Mark the outside of the plugs so you don't get them switched. Use a small flat screw diver and/or pliers to unplug the leads. Plug the leads into the new assembly, and reinstall the torx screws for the inner panel. Easy fix.

I removed the inside cover screws allowing me access to the door handle latch assembly....Replaced switch connections and re-assembled

After reading the installation instructions on line I diagnosed the solution and order the part from PartSelect. The part arrived on the promise day. Having read what others wrote about their installations, installing the part was possibly the easiest repair I have ever made. I will definitely remember PartSelect my future needs.

Turned off the power at circuit breaker. Used a 'star' fitting for screws on the inside of the door. Two short pieces of 1" x 2" about 8" long were need to keep the inside of the door piece seperated from the outside door. Wiring on the inside would not allow a full lift of the insides of the door. The plugs to the old unit were not easy to get off. Some effort and the help of a screw driver or pliers are needed. Putting back the two plugs is easy and the latch assembly can easily be put in place. The latch assembly is kept in place by the same screws that are used for the rest of the inner door when putting it back together. The procedure was easy. The shipment of the part needed was very fast! A great amount of money was saved! (Rose, my wife, ordered the part and I (tony)did the rest)

removed the screws from the inside door. Unsnapped the old handle and snapped on the new one. Replaced screws. works like new.

Opened up inside panel and removed old handle assembly. Searched Internet and found PartSelect. Did not have model number, but matched picture to that on their website. Part came in a few days and fit perfectly. Saved a bunch of money!

Good job!

Steve Ellsworth
"Landlord Steve"

Your delivery of part was super quick.Followed instructions on your web site by others. Really simple procedure.Torx bit essential. Pliers needed to remove wiring connectors.

Super easy,,, great next day Fed Ex delivery. Need Torx drivers.