MDB5600AWB Maytag Dishwasher - Instructions

I removed the inside door cover. Pulled the 2 wires from the old unit and reinstalled them on the new one. As I removed the first wire, I placed it on the new unit....then removed the second one and installed it. I then replaced the latch assembly inside the door and reinstalled the inner door cover. It took longer to open the package and look at the new latch than it did to install it. I e-mailed PartSelect for the part on Christmas evening (Saturday) and had the new part delivered to my home by noon the following Tuesday.

Removed the upper spray supply manifold and the lower spray arm, and all other pieces to reach the chopper assembly, removing those pieces, installing the new pieces, and put everything back together. Success! The dishwasher is working as good as new.

It is difficult to remove the electrical connection from the old unit. The replacement was otherwise simple.

The video for this repair was helpful, and the only issue that I had was changing the electric connections that are held on tightly with plastic clips that need to be pried open for removal and replacement. MAKE SURE YOU DISCONNECT POWER AT YOUR FUSE BOX!!

Remove about 10 screws. unplug the microswitches on the handle. plug the wires onto the new handle and reinstall.

This was the easiest repair I have ever done! Ordered in a few mins, and received the very next day. Opened the box and installed the two wheels - Done. That was Easy! Thank you so much for such quick service! Most definitely will use your company again in the future.

Unscrewed the internal door lining with star-shaped screwdriver bit (luckily I had it) and replaced the latch assembly. I left the old electric switches: was easier to unhook them than disconnect the wires. Overall much easier than expected.

Just took the dishwasher door apart, took out the old latch (handle) assembly and popped in the new one. If a 74-year-old woman can do it, I'm sure about anyone could. Thanks for the good service.

Took out the old, put in the new. Thank you.

I unscrewed the inside of the door and lifted out the latch assembly. I disconnected the wires from both sides of the latch. I reversed the procedure to install the new part.

removed seven of the nine door panel fasteners, separated the panel at the top, removed power leads from old part and attached to the new, replaced fasteners

Just took the basket out of the box and put it in the disjwasher.

Hello guys...this is really too easy to report!

Discovered problem Saturday order part arrived Tuesday, great service. Unscrewed torque screws left inner cover on. Used needle nose pliers to take wires off. (they were tight) Put new latch assembly in place connected wires and put screws back in.

Turned off power to dishwasher, then I removed inner panel using a torx screwdriver. Then I just removed the old latch / switch and replaced it with the new.