Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MCT890P3

MCT890P3 Frigidaire Microwave - Overview

Get Parts and Repair Help for MCT890P3

If you know the microwave repair part you need, you can browse the list of all parts on the MCT890P3, or you can search by name or part description. You can also find your part by where it is located on the MCT890P3 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.03

Touch Up Paint - White

This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear....

$1.03

NUT

This push-on nut can be used for a variety of household appliances. To find the exact location and proper application of this part, refer to your appliance manual. Push-on nuts, also known as push-on retainers or push-on fasteners, allow components to be easily and securely assembled to a smooth shaft. A push-on nut has radial teeth that are formed at an angle perpendicular to the target shaft. The angled teeth allow the nut to slide onto the shaft in one direction while resisting motion in the reverse direction. Remember, to ensure the nut properly holds the shaft securely in place, it is important that the shaft material is softer than the nut.

$16.37

BRACKET-SWITCH

$3.54

Wire Rack Support

This wire rack support is designed for use in your microwave oven. If the support that contains your wire rack is damaged, you will need to replace it with this part. The rack support is made entirely of plastic, and is white in color. This part is about 3/4-inch in length and 1/2-inch in width. This product is sold individually. This is an OEM part sourced directly from the manufacturer.

$33.33

Glass Tray Drive Coupling

This glass tray drive coupling is also known as a bushing, and it is designed for use with microwaves and microwave ovens. This is a genuine OEM replacement part. The bushing is lo...

Glass Cooking Tray

Interlock Switch

This part is used to stop the flow of electrical current when the door is opened to prevent any microwave energy escaping.

$5.56

SCREW

MOTOR-TURNTABLE

FUSE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Turntable motor was worn out - gears were slipping

  • Customer: Chad from Roanoke, VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
The job was very simple, remove the bottom plate of the microwave which is four screws and it exposes the motor. There are two screws which hold the motor in place that you access from inside the unit. Remove the two screws being carefull not to lose the gasket that is in between the motor and the bottom of the unit. Set the new motor in place being sure to ... read more

Turn Table Was Unable To Turn To Heat Food Properly And Thoroughly

  • Customer: Wendy from Shermansdale, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 5 people found this instruction helpful
I pulled out the glass turn table tray and put the bushing in the little whole, in the center of the bottom (under turn table tray). Fixed the problem right away. Working wonderful! Was happy with how easy it was to locate part. Had received this microwave as a wedding gift, feb. 1994. Thought I was going to have to replace. Thanks to your website I was... read more