This ice maker (Complete Icemaker Assembly, Whirlpool Icemaker Kit, Ice Maker Assembly, Refrigerator Ice Maker, Icemaker) receives water from the water inlet valve, freezes it, and dispenses it into t...
This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor ...
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This hinge bracket, also known as a door stop, is attached to the bottom of the door and is used to limit how far the door swings out to protect the refrigerator itself, and any surrounding cabinets f...
This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake re...
$165.75
On Order
Questions And Answers for M1TXEGMYW01
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gracie Good
January 9, 2020
I have an ice maker....
is there a replacement water filter....if so where is it located?
i purchased a replacement filter online using the above model # i can't find a filter anywhere on the frig.
For model number M1TXEGMYW01
Hello Gracie, thank you for your question. This unit was not equipped with a water filtration system when produced. There is no filter for this unit. I hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Bayani
November 25, 2019
Evaporator fan not spinning , freezer is ok its makes ice but fridge is hot cos this fan is not working, on this model , is evaporator fan has a circuit board that controls it
For model number M1TXEGMYW01
Hello Bayani,
Thank you for your question. There is not a circuit board for the motor, you would need to replace the motor itself under part PS11740359 for your model. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
June 16, 2021
Fridge never had an ice maker, it's set up for one. I've found replacements but there not complete kits. Can you give me a complete kit number. Thanks
For model number M1TXEGMYW01
Hi Mark,
Thank you for your question. The part number for a complete ice maker kit which includes the ice bin is PS11751407. To place an order for the kit, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps!
Does this refridgerator have air and water filters
For model number M1TXEGMYW01
Hello Don, thank you for reaching out. Your model does not have an air and water filter. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Was this helpful?
Thank you for voting!
Bob
May 24, 2023
Ice maker appears to be leaking and causing ice to freeze together
For model number M1TXEGMYW01
Hi Bob, thank you for reaching out. Based on the description that you have provided, we would recommend checking that the water supply line is connected tightly. If there is no issue in the water supply line, you may need to replace the ice maker kit, part number PS358591. We hope this sorts out your problem!
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the
... Read morepower connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck le
... Read moret's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
I am NOT a handyman, and my family laughed at me when I said I was going to fix the ice maker all by myself. I ordered a replacement ice maker. When it arrived, I opened the box and read the instructions. It seemed easy. I removed the old ice maker, with a socket set. I then took off the shut off lever from the old one and placed it
... Read moreon the new one, since the new one didn't come with it. I then put the new one in place. All the parts fit perfectly. The ice machine was making ice within an hour. My family was amazed... and I got the last laugh!
