Models > M170W > Instructions

M170W Jenn-Air Microwave - Instructions

All installation instructions for M170W parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the M170W
1-8 of 8
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave would not heat food. All other functionality was working as expected

  • Customer: James from Staten Island NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 6 of 9 people found this instruction helpful
I disconnected the power. Took off the front panel that was held together by two screws. Reviewed the schematic that was inside. Located the switches, saw which lead was burnt. Unscrewed the two screws that held the switch in place, cleaned the connector, and put the switch in and connectors back. Powered the device, tested for cooking/heating functionality. It worked, Closed the front panel

Glass Carousel Tray broke

  • Customer: John from Crows Landing CA
  • Difficulty: Very Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 8 of 15 people found this instruction helpful
I propt the door of the microwave open using a chain and come along. I then used an engine cherry pick to hoist the Glass Carousel Tray up and level with the floor bottom of the microwave. once it was level I slid the tray over onto the center of the microwave and set it down slowly. I then rmoved the chain and come along and shut the door.

our glass carousel broke right in half, after a gradual crack developed.

  • Customer: Doe from Madison CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 8 people found this instruction helpful
I popped in the new tray, and that was that! A perfect fit!

Needed to replaced the glass carousel Tray

  • Customer: Carlene from Portland ME
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 2 people found this instruction helpful
The replacement would have been easy - remove the glass tray and put the new one in,

Replace Glass Cooking Tray

  • Customer: Allen from West Valley CIty UT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
The circular glass tray for my mother's microwave was accidentally broken. Fortunately, PartSelect made it easy to locate and to order a replacement.
As for the repair, I opened the door and put it in. The work was done faster than it took me to type this email.

Replacing broken glass tray

  • Customer: thomas from port charlotte FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
This was the second company I ordered from, the first one from them didn't fit and then they advised no replacement existed. Hopefully I will get a refund for the wrong part sent back. This time part select sent the right part the first time and it fit right away. Many thanks.TC

Was broke.

  • Customer: Clara from Rockaway NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 4 people found this instruction helpful
Replace the tray. Was very easy. Thanks for your prompt and accurate service.

microwave would not heat.

  • Customer: outstanding from Galena MD
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
hardest part was taking the microwave down off of the wall to gain access to the diode. Thought if was the transformer but ended up being just a blown diode. remove and replace and bench test. that part took 15 minutes . moral of the story don't boil water under the side of the microwave that holds the electric components.
All Instructions for the M170W
1-8 of 8