Models > LW2511ER

LW2511ER LG Air Conditioner - Overview

Models starting with LW2511ER

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
FAN,AXIAL – Part Number: 5900A10011D
FAN,AXIAL
★★★★★
★★★★★
(4)
PartSelect #: PS12747825
Manufacturer #: 5900A10011D
$61.88
  In Stock
CLAMP,SPRING – Part Number: MBU64446301
CLAMP,SPRING
★★★★★
★★★★★
(1)
PartSelect #: PS16224004
Manufacturer #: MBU64446301
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
$6.38
  On Order
REMOTE CONTROLLER ASSEMB – Part Number: 6711A20066L
REMOTE CONTROLLER ASSEMB
★★★★★
★★★★★
(1)
PartSelect #: PS3636484
Manufacturer #: 6711A20066L
$28.26
  In Stock
Thermistor,NTC – Part Number: 6323A20012C
Thermistor,NTC
★★★★★
★★★★★
(1)
PartSelect #: PS3528997
Manufacturer #: 6323A20012C
This part is a thermistor assembly and it works in conjunction with your room air conditioner. The thermistor is a sensor that attaches to the control board of your air conditioner. Once attached it w...
  No Longer Available
PCB Assembly,Main – Part Number: 6871A20604A
PCB Assembly,Main
★★★★★
★★★★★
(2)
PartSelect #: PS3529791
Manufacturer #: 6871A20604A
This control board, also known as a display board, is used for air conditioners. The control board regulates and carries the power to the various air conditioner components. If your control is defecti...
  No Longer Available
Panel,Control – Part Number: 3720A10112A
Panel,Control
PartSelect #: PS3521457
Manufacturer #: 3720A10112A
  No Longer Available
PCB ASSEMBLY,DISPLAY – Part Number: EBR74697801
PCB ASSEMBLY,DISPLAY
★★★★★
★★★★★
(1)
PartSelect #: PS7792920
Manufacturer #: EBR74697801
$48.14
  In Stock
Filter Assembly,Air Cleaner – Part Number: 5231A20027A
Filter Assembly,Air Cleaner
★★★★★
★★★★★
(1)
PartSelect #: PS3527546
Manufacturer #: 5231A20027A
$20.89
  Special Order
GRILLE ASSEMBLY,FRONT – Part Number: AEB74086108
GRILLE ASSEMBLY,FRONT
★★★★★
★★★★★
(1)
PartSelect #: PS16546956
Manufacturer #: AEB74086108
$151.30
  In Stock
CASE ASSEMBLY,CONTROL – Part Number: ABQ74405902
CASE ASSEMBLY,CONTROL
PartSelect #: PS11707035
Manufacturer #: ABQ74405902
  No Longer Available
Escutcheon – Part Number: 3831A10021M
Escutcheon
PartSelect #: PS3522248
Manufacturer #: 3831A10021M
  No Longer Available
LOUVER,VERTICAL – Part Number: 4758A30050E
LOUVER,VERTICAL
PartSelect #: PS16544688
Manufacturer #: 4758A30050E
$6.38
  In Stock
View More
Back to Top

Common Symptoms of models starting with LW2511ER

[Viewing 3 of 3]
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Does not shut off
Fixed by
these parts
Fixing
Show All
Does not turn on
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
accumulated condensation caused condenser fan failure
Pull the unit out of cabinet. Remove the brace between the blower housing and the condenser frame. Remove the screws securing the the condenser coil to the base and carefully lift and angle it just enough for the broken fan to clear ( be very careful with the refrigerant lines ). Slide the new fan back on the shaft and secure with the spring clamp. I used a pair of vice grips to compress the clamp, but be very careful because the clamp can exit the pliers, if the jaws are not perpendicular to the clamp. If you live in a area with high humidity remove the rubber plug at the back of the unit or the condensation will break your new fan. This fan needs some changes in design because the condensation puts too much stress on the plastic that contacts the motor shaft - some metal between shaft and the blades would help.
Read less
Parts Used:
FAN,AXIAL CLAMP,SPRING
  • Sam from MCQUEENEY, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
15 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Fan
Part of the fan blade broke on my AC unit and was causing a vibration. This made the AC unusable. The ordered Fan was a perfect OE replacement. I simply removed the outside over and then the fan shroud inside the unit. I carefully repositioned the condenser unit being careful not to damage the fins. Using a pair of pliers, I removed the retainer clip and removed the old fan. The new fan slid right over the shaft. I replaced the retaining clip and then repositioned the shroud. Then I placed the condenser and fins back into place and then placed the cover back over the unit. Worked perfect. No issues. Take your time. Excellent replacement fan!
Read less
Parts Used:
FAN,AXIAL
  • April from EASLEY, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit would not turn on.
1 - Unbolted a/c unit from window cover - 2 - pulled internal unit forward to reveal display and controller area - 3 - used #1 phillips to remove screws to open cover - 4 - removed display assembly by disconnecting ribbon cable from main pcb - 5 - removed old pcb from display assembly 4 small phillips screws - 6 - reused ribbon cable and temp probe in new pcb and installed new pcb into display assembly - 7 - installed updated display assembly - 8 - closed controller assembly - 9 - restored a/c unit to window frame cover - 10 rebolted connections to window cover - 11 - started a/c unit!
Read less
Parts Used:
PCB ASSEMBLY,DISPLAY
  • Tim from Chapel Hill, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top