The range thermostat is also commonly known as a stove, oven, cooktop, or range thermal fuse. This thermostat protects your oven from excessive heating, and will shut the oven heat off if excessive he...
This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the applia...
This is a genuine OEM leveling leg for various models of LG ranges. This leg is used to stabilize and support the range, and if damaged, broken, or missing, will cause your range to rock back and fort...
This radiant heater may also be known as a radiant surface element and is a part for your range. The function of this heater is to supply heat to the cooking area that is on the top of the range. This...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
December 4, 2023
My convection fans run 24/7.
Does this sound like a PCB sub assembly fault?
For model number LSE3092ST
Hello Donald, thank you for the question. Based on our research, the issue is most probably with the PCB assembly. We would suggest replacing the PCB assembly, part number PS3533964, to solve the problem. It monitors the temperature and controls the oven heat. Glad to be of help!
I only have 3 out of 5 stove top elements working.
Thanks
For model number LSE3092ST
Hi Philippe, thank you for contacting us. We have found that the issue is with the terminal block, part number PS12715316. The terminal block connects the house power to the range wire harness. We would recommend checking the terminal block to fix the issue. We hope this solves your problem!
Our oven temperature is way below what the display shows
For model number LSE3092ST
Hi Jacobus, thank you for getting in touch. We have concluded that the issue is with the temperature sensor, part number PS11732697. It measures the temperature inside the oven. We would suggest replacing the sensor to fix the issue. We hope this solves your problem!
During baking mode the oven shuts down showing a Pf code on display
For model number LSE3092ST
Hi John, thank you for the question. According to our research, the PF code means power failure. Try powering the oven down at the circuit breaker for 30 minutes, and during this power down check all connections to the control board, then re-power it back up. If this does not help then you may need to replace the control board, part number PS3533908. We hope this helps!
Verified P/N with LG. Took a few days . They sent names of several suppliers, cost was almost double. Ordered part from P/S, here in 2 days. Watched video on you tube. Unplugged, took off back, unplugged bake element, removed power box. The opening for bake element is still attached to rear panel by tiny bits of sheet metal. Used Dremel w
... Read moreith cut-off wheel to cut thru nibs & deburr opening. this panel has to be removed, it rests on bottom panel & is held in position by power box. Removed bake element carefully, front of element broken, tried to put new element in, would not fit. Had to grind notches in bottom panel down to clear supports on new element. This did the trick. back together quick & no problems. If had to do again estimate less than 1 hour.. By the way am 81 yrs. young.
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution: 1) Put something between the range top and range - like a
... Read moresheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet. 2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping). Unfortunately I probably won't order
... Read more from PartSelect again.
