LSD2615HEZ Admiral Refrigerator - Instructions

Just snapped in the supports. So easy! Having clear descriptions of the parts needed made this work well! Thanks!

My 8 year old Maytag side-by-side started having a buzzing sound coming from the compressor area that lasted around 8 to 10 seconds which was followed by a "click" sound. It would repeat every 3 minutes or so. From what I read, the Overload/Relay with Start Capacitor was the likely culprit. I got it replaced tonight but unfortunately, the same problem is occurring. The downside is I likely have a bad compressor (not worth replacing after cost of parts and labor) and wasted $60 on the Overload/Relay with Start Capacitor. Partselect's service though I would say is top notch. I received the part within two days of placing the order and my order confirmation email even had a link to a youtube video detailing the installation. That was very helpful. I just wish I was looking at a $60 fix vs a grand for a new fridge! Oh well, live and learn....and no more Maytag.

Once I received the new icemaker, I removed the old one by loosening the two upper screws and removing the lower. The wire connector came out easily. The wire and the bale from the old unit had to be transferred to the new unit. Then the new unit was reinstalled and the wire plugged back in. It took several hours for the cubes to begin dropping.

The DIY video was very handy and precise to every visual detail needed for anyone to do their very own repair. It doesn't get any better than that.

I was very pleased with the entire experience. The part was easy to locate on the web site, it arrived very quickly and you sent a how-to video.

So cool that you approached me for an update. I noticed that the nipples on the filter head/ receiver were worn down. So I ordered a new filter head/ receiver with hose and installed on my own for like $45. It's working like new now and I am happy I didn't pay $200 for a repairman. It made my wife happy...happy wife = a happy life! Cheers from Santa Cruz, CA.

Like everybody else it went fairly easy,found the parts easily and the prices were fair,shipping was fast. Thank you

Ordered the replacement. Removed the old one, followed the instructions, installation was a snap.

Emptied the shelf, removed the drawer, removed the glass shelf, pulled broken frame, installed new frame, revered the procedure. It practically took longer to open the box and remove the part than it did to replace it... the glass shelf had already been cleaned, or THAT would have taken longer =)

The part came in 5 days from time order. take less then 10 minute done. part work well, have ices again, Thank you Part Select. we don't have to buy a new Rerigerator

I started by changing the water inlet valve. It made one batch but it did not eject into the ben. I removed the ice maker and found that the coating inside was bad. I changed out the ice maker and it is now making lots of ice.

I turned the water supply off and installed the new filter, which was easy. the hard part was finding the water filter at my local home improvement stores; they don't carry it. In the future I will use only Part Select.

Reomove Ice bin from unit.remove plastic front. Remove the 2 bottom screws of dispenser assembly. removed old assembly. position new assembly. Replace bottom 2 screws.reinstall plastic front and reinstall into unit.

PartsSelect makes it so easy. I love that they inlcude a picture of each part so I am sure I am buying the right thing!

I went on line and viewed the video. It looked so easy I ordered the new ice maker. Having the information I was able to take apart the old one and view the problem. By the time the new part arrived I was experienced with the installation. I was shocked when the new ice maker arrived within 1 day. I completed the installation without a hitch, I was delighted with the ease of installation and the operation of the new iace maker.Thanks again...Ray