Models > LSC27910TT (LSC27910TT /01)

LSC27910TT (LSC27910TT /01) LG Refrigerator - Overview

Get Parts and Repair Help for LSC27910TT

If you know the refrigerator repair part you need, you can browse the list of all parts on the LSC27910TT, or you can search by name or part description. You can also find your part by where it is located on the LSC27910TT by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.05

Dispenser Funnel

NOTE: As per manufacture, due to the update in design you must also order the funnel frame.

$1.98

Spring,Lever

$3.05

Tray,Ice

$91.27

Water Valve Assembly

$45.78

Motor,AC

$16.66

Lamp,Incandescent

$63.57

Filter Assembly,Water

$40.25

MOTOR,DC

$7.43

GUIDE,RAIL

$2.36

STOPPER,HANDLE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Ice dispenser

  • Customer: James from Englewood FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 15 people found this instruction helpful
After checking the prices of new refrigerators, I decided that I had nothing to lose trying to repair the sticking ice/water dispenser. I followed the previous instructions by prying off the panel with a screwdriver working my way around. Some effort is needed, but it will come loose before it breaks. You should remove the funnel first. If you have an older ... read more

My ice maker overflowed water and made a mess in the freezer

  • Customer: steve from clarence center NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The part was extremely easy to replace. The unit came out with one screw, and I had to unplug the wire connection. After removing I noticed the ice tray was cracked - that's what caused the problem. The new unit went in easily with 1 plug in connection and 1 screw. I was done in less than 10 minutes. read more

Rails broke when overloaded

  • Customer: James from Bremerton WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed shelf that rails were mounted to. Used a std phillips screwdriver to loosen screws attaching the rails, three per side. Removed damaged rails, lined up new rails and tightened screws. Returned shelf to refrigerator and inserted tray on the new rails. read more