Models > LSC27910SW

LSC27910SW LG Refrigerator - Overview

Parts and Repair Help for models starting with LSC27910SW

If you know the refrigerator repair part you need, you can browse the list of all parts for models starting with LSC27910SW, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with LSC27910SW

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Guide Rail - Right Side

$3.06

Tray,Ice

$15.41

Lamp,Incandescent

$3.06

Funnel

$91.27

Water Valve Assembly

$40.29

Motor,AC

$63.57

Filter Assembly,Water

$6.34

Switch,Push Button

$8.18

Tube,Inlet

$7.43

GUIDE,RAIL

Common Symptoms of models starting with LSC27910SW[Viewing 2 of 2]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Rails broke when overloaded

  • Customer: James from Bremerton WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed shelf that rails were mounted to. Used a std phillips screwdriver to loosen screws attaching the rails, three per side. Removed damaged rails, lined up new rails and tightened screws. Returned shelf to refrigerator and inserted tray on the new rails. read more

Both guide rails had cracked at the front end I guess do to excessive weight in the drawer.

  • Customer: Robert from Parkland FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Simply removed the drawer, then removed the shelf above which held the guides, removed the guides ( 3 screws per side )and replaced them. read more

refrigerator light stayed on when door was closed & heat from lights melted plasted parts

  • Customer: Barry from Baton Rouge LA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
replaced both push button lights (french doors on refrigerator) and replaced plastic parts on overhead lights (note: ordered/or was sent wrong type pushbutton light switches - with one phone call was reinbursed cost of these switches & was sent correct switches 3 days later) with no hassle read more