Models > LSC21943ST (GR-L227SSPA)

LSC21943ST (GR-L227SSPA) LG Refrigerator - Overview

Get Parts and Repair Help for LSC21943ST

If you know the refrigerator repair part you need, you can browse the list of all parts on the LSC21943ST, or you can search by name or part description. You can also find your part by where it is located on the LSC21943ST by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.39

Tube,Plastic

$6.39

Switch,Push Button

$2.00

Spring,Lever

$3.11

Dispenser Funnel

NOTE: As per manufacture, due to the update in design you must also order the funnel frame.

$68.41

Filter Assembly,Water

$152.04

Ice Maker Assembly

The wire harness is NOT available separately.

$17.10

Lamp,Incandescent

$92.04

Water Inlet Valve Assembly

This water inlet valve has three solenoid valves and push in fittings. When energized this part releases water from the supply line into the ice mold.

$4.62

STOPPER ASSEMBLY,DOOR

$22.03

Ice Chute Door - Heated

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Plastic Supply Ice Maker

  • Customer: Norman from Saint Clair Shores, MI
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Second time I had to replace inferior plastic tubing being the size it is you can't buy it at any store. 5/16 Can't find pex in that size. read more

The water line was leaking

  • Customer: Awilda from Staten Island, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the damaged tube and replaced the it with a new one. read more

Water and Ice dispensing just stopped working. Also Ice trap was broken.

  • Customer: BRENT from Glendale, AZ
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
Water valve replacement at back bottom right. Removed, water supply line and old valve with 1 screw and removed clips from hoses. Replaced with new valve and re-clipped hoses. Easy fix! Cleaned coils and back with blower and vacuum cleaner while I was in there too. I also had leak in water supply line, replaced. Ice trap door replacement was a little more ch... read more