All Installation Instructions for LG Refrigerator LRTN22310TT

old bushing worn and broken

removed the upper freezer door to access screws to remove lower door.
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....

Parts Used:

Bush

Jerry from CORSICANA, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

13 of 20 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

two screws and done

part fit into slot and screwed them down

Parts Used:

Lower Holder Cover

Daniel from TROY, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

bottom door dropped slightly and bottom hinge area rubbing on steel door support

removed 3 fasteners for top door and placed freezer door aside, then removed 3 more fasteners on bottom refrigerator door and place that aside. replaced bushing on lower door bracket and reversed the above procedure to reinstall doors.

Parts Used:

Bush

Louis from PHILADELPHIA, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set

6 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the broken shelf is 13.5" wide. LG sends 12" wide. 13.5" no longer available

Part Select folks are very professional & courteous. They can only identify the replacement I needed based on data from LG. The data is WRONG. LG should be billed by Parts Select for their valuable time & shipping expenses. What I did was take the old shelf assy with rails & insert 2 each 1/4 - 20 threaded rods into existing holes in the rear of the shelf with nuts & lock washers on the inside & outside of each rail to stabilize it. It facilitated adjustment required to keep the rails parallel so the meat box would be secure. 85 year old guys shouldn't have to do this. LG should do a better job of servicing their product throughout its anticipated life expectancy. They should also send me the proper part.

Parts Used:

SHELF ASSEMBLY,REFRIGERA

ROBERT from NYACK, NY
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Wrench (Adjustable), Wrench set

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken clip that keeps the lower holder cover from falling off bottom of refregerator

Used a screwdriver to take off broken clip and then used same screwdriver to replace with new clip. Very easy.

Parts Used:

Lower Holder Cover

Renita from FORT MADISON, IA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replace lower grill bracket

Pull off the grill cover and remove the 2 screws from the old part and simply screw in the new part. Don’t lose the screws there are no new ones with the new part. Replace cover.

Parts Used:

Lower Holder Cover

James from DICKSON CITY, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Track for drawer broken

Very easy . Took out old in with new.
Dimensions provided by this site were exact

Parts Used:

Crisper Drawer Cover - Glass NOT Included

John from MASSAPEQUA, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Interior light switch not working

Remove two screws on top of the fridge; removed old switch and inserted new switch. Worked like a charm. Replace casing and screws.

Parts Used:

Switch,Push Button

Sharon from HOULTON, ME
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

drawer was broken and replaced it

Just put the drawer in and it was ready to go. Like those kind of repairs

Parts Used:

Tray Assembly,Meat

Ilene from Lincoln, NE
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

light was not going on sometimes, or needed wiggling to work

purchased a new switch. The old switch just needed to be lightly pried out with a screw driver, then it was simple to unplug the old, and plug in the new. Voila! Light !

Parts Used:

Switch,Push Button

Nancy from Hallandale Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Frame of the major shelf broke

It was an easy repair, not even sure if I would call it a repair. First remove the two veggie bins and then remove the frame and glass shelf. Put the new frame I've received with the glass and slide it back in the refrigerator. Thanks to the help of the customer service rep and made sure I had the correct part.

Parts Used:

Crisper Drawer Cover - Glass NOT Included