Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LRTN19311SW

LRTN19311SW LG Refrigerator - Overview

Get Parts and Repair Help for LRTN19311SW

If you know the refrigerator repair part you need, you can browse the list of all parts on the LRTN19311SW, or you can search by name or part description. You can also find your part by where it is located on the LRTN19311SW by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.34

Holder,Cover(Lower)

$2.34

Screw,Customized

$51.28

Crisper Drawer Cover - Glass NOT Included

$9.19

Switch,Push Button

$3.63

Bush

$16.67

Lamp,Incandescent

$6.77

Guide Assembly,Rail

$6.77

Guide Assembly,Rail

$6.42

Rail,Slide

$2.06

Damper,Motor Support

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Frame of the major shelf broke

  • Customer: Francisca from Reno, NV
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
It was an easy repair, not even sure if I would call it a repair. First remove the two veggie bins and then remove the frame and glass shelf. Put the new frame I've received with the glass and slide it back in the refrigerator. Thanks to the help of the customer service rep and made sure I had the correct part. read more

refrigerator light stayed on when door was closed & heat from lights melted plasted parts

  • Customer: Barry from Baton Rouge, LA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
replaced both push button lights (french doors on refrigerator) and replaced plastic parts on overhead lights (note: ordered/or was sent wrong type pushbutton light switches - with one phone call was reinbursed cost of these switches & was sent correct switches 3 days later) with no hassle read more

light was not going on sometimes, or needed wiggling to work

  • Customer: Nancy from Hallandale Beach, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
purchased a new switch. The old switch just needed to be lightly pried out with a screw driver, then it was simple to unplug the old, and plug in the new. Voila! Light ! read more