Models > LRM1250W 01 > Instructions

LRM1250W 01 (LRM1250W/01) LG Microwave - Instructions

All installation instructions for LRM1250W 01 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the LRM1250W 01
1-11 of 11
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

super easy

  • Customer: Henriette from Davis CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
saved me having to buy a new microwave. It was super fast delivery, had the part the next day! Amazing service and great customer support.

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws.

The button that opened the door had plastic hooks break off.

  • Customer: John from Minneapolis MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I looked up the part number, with shipping it came to $16, and in one minute of installation time, I just gently pushed the button into the front using the original springs that pushed the button back out, and it just clicked into place, the microwave back in action.

door button retaining clips broke off. button would fall out of place

  • Customer: greg from minneapolis MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Inserted spring on middle post on button back side. Pushed button/spring into hole on front of microwave until clips engaged and snaped into place.

suddenly stopped working while in use

  • Customer: Kevin from Colonia NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
i unplugged the unit,unscrewed the outer shell so that all the wiring and internal components were visible.starting at the first of three micro switches i removed the slip on terminals installed the alligator clips too the wires so the switch would now be bypassed.i made sure the wires and clips were not touching anything plugged unit in and it worked.i then installed the new switch and closed up the outer shell

Door button - the one you push to unlatch and therefore open the door, was broken.

  • Customer: Don from Hampton VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The old button fell out because the "tabs" on the end of the posts that come out from the button had broken off. These "Tabs/posts" hold it in place - you'll see how when you look at it. All that was necessary was to put the springs from the old one onto the new one. Make sure to put the thing in right-side up; there are two "tabs/posts" on the top side, and one on the bottom. Gently slide it into position as nearly straight as you can, squeezing the "posts" until they clear the front of the opening. Continue to slide in EVENLY until you feel the part "click" into place. That's it! I recommend cleaning out the area fully before installation, with a a god household cleaner, and also putting a thin coat of some sort of lubricant on the part before you put it in. (You won't be able to do that after it's installed.)

didn't have it at time of pruchase

  • Customer: Yolanda from Birmingham AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
brought new one and the help with the sites pictures to describe what I need was extremely helpful. The prompt delivery was great.

Microwave Button had broken plastic hooks causing it to pop out.

  • Customer: DONAND from OVERLAND PARK KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replaced Microwave Button with new button and hooks. Repaire took one min. by just pushing the new button on the Microwave and it hooked on and did not pop out. Good for another 4 years maybe!

no heat

  • Customer: Nelia from Streamwood IL
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
unplug the unit then pull down , lot of screws are on top. open the cover . you could see the parts that need to replace on the right hand side (heavy side). disconnect wires then test the parts that need to replace by a tester to make sure that it's really broke .then unscrew part and replace .

The plastic base that rotates under the glass plate broke.

  • Customer: Kiah from CARPINTERIA CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Lifted up the glass plate, lifted out the plastic base that rotates and placed the new one inside. The piece that connects is shaped like a semi-circle, so I rotated it until is dropped into place. Then I put back the glass plate and it was finished.

turntable inop due to broken glass tray.

  • Customer: Joseph from Pickens SC
  • Difficulty: Very Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Put on safety glasses AND leather work gloves. Grab pliers. FIRMLY grasp the110 A/C power cord with jaws of pliers, squeeze and pull plug from 3prong power socket. Carefully press black bar on front panel to open oven door. Stand back so door doesn't strike your face . Lift out damaged glass tray with BOTH gloved hands..place in re-cycle bin. Open parts package carefully and install the NEW glass tray. Plug 3prong plug BACK into 110v outlet and press start button........Stand back! View the new glass tray turning in a circular fashion through the heat/radiation proof front door. Job well done!
All Instructions for the LRM1250W 01
1-11 of 11