Oven would initially start to heat up but would not hold its temp
- Customer: Leonard from Plano, TX
- Difficulty: Really Easy
- Time to Complete: 15 - 30 mins
- Tools Required: Pliers, Screw drivers
- 0 of 0 people found this instruction helpful
I searched online and found someone that seemed to have the exact problem. That person had replaced the lower burner and the same PCB board I replaced. I was able to test the lower burner without removing it and it tested OK. The PCB board in the article I had checked was burned and obviously bad but mine was not. I took a chance and ordered just the PCB board. I replaced this board and the oven now works perfectly. I seems this board was not turning on the bottom burner but the system thought it was working fine.