Models > LMVM2075SB

LMVM2075SB LG Microwave - Overview

Get Parts and Repair Help for LMVM2075SB

If you know the microwave repair part you need, you can browse the list of all parts on the LMVM2075SB, or you can search by name or part description. You can also find your part by where it is located on the LMVM2075SB by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.06

Light Bulb - 125V 30W

$4.59

Cover,Lamp

$12.93

Filter,Charcoal

$3.06

Switch,Micro

$15.41

Filter,Grease

$1.96

Screw,Tapping

$3.06

Holder,Cook Auxiliary

$3.06

Switch,Micro

$1.96

Connector Assembly

$62.66

Magnetron

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The unit would nothing no lights no controls

  • Customer: James from Tucson AZ
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I checked the incoming power and main fuse. Both are good.removed the microwave from the wall mount, removed the door and outer cover. Removed the right side panel and replaced the main PCB. I found loose mounting screws for the vent fan and other placecs so I tighten all the hardware I could see. Pluged the unit and found the display said input time and... read more

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

tab was broken off when changing bulb

  • Customer: Shawn from Seattle WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed old cover to lamp and reinstalled the new one by unscrewing one screw and screwing the new one back in read more