Models > LMVM1955SBQ

LMVM1955SBQ LG Microwave - Overview

Get Parts and Repair Help for LMVM1955SBQ

If you know the microwave repair part you need, you can browse the list of all parts on the LMVM1955SBQ, or you can search by name or part description. You can also find your part by where it is located on the LMVM1955SBQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$4.59

Cover,Lamp

$3.05

Switch,Micro

$12.93

Filter,Charcoal

$1.95

Screw,Tapping

$16.66

Filter,Grease

$3.05

Holder,Cook Auxiliary

$1.95

Connector Assembly

$1.95

SCREW,TAPPING

$8.18

Motor, AC Synchronous

$1.98

Screw,Tapping

Common Symptoms of the LMVM1955SBQ [Viewing 1 of 29]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bad magnetron

  • Customer: Tom from SAN DIEGO CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Went on the net to determine the possible cause ordered the new magnetron and found the company manual for free. Replaced as directed and the end result is I saved on having to buy a new $300 microwave read more

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

tab was broken off when changing bulb

  • Customer: Shawn from Seattle WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed old cover to lamp and reinstalled the new one by unscrewing one screw and screwing the new one back in read more