Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LMV2061SB

LMV2061SB LG Microwave - Overview

Get Parts and Repair Help for LMV2061SB

If you know the microwave repair part you need, you can browse the list of all parts on the LMV2061SB, or you can search by name or part description. You can also find your part by where it is located on the LMV2061SB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.72

Switch,Micro

This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door sw...

Order within the next 9 hrs and your part ships today!
$8.60

Cover,Lamp

Order within the next 9 hrs and your part ships today!
$17.86

Filter,Charcoal

Order within the next 9 hrs and your part ships today!
$5.72

Bracket,Idle

Order within the next 9 hrs and your part ships today!
$5.24

Fuse,Time Delay

The fuse-time delay may also be known as a line fuse or a microwave fuse, and it is a piece for your microwave. The function of this part is to shut off the microwave if there is a...

Order within the next 9 hrs and your part ships today!
$11.85

Lamp,Halogen

This is a halogen lamp, or light bulb, for a microwave. The microwave light should illuminate the inside of the microwave while the door is open and while the appliance is running. If the light bulb does not illuminate, you may need to replace it. This part is sold individually. It is a common wear part and does not have a standard light bulb base, so consider ordering a spare. This part is made of clear glass. If the glass on the existing light bulb is broken, you may need to use a pair of needle nose pliers to remove it. Be sure to handle the broken part with work gloves and disconnect power to the appliance before changing the bulb.

Order within the next 9 hrs and your part ships today!
$5.72

Switch,Micro

This is a micro switch, but you may also know it as a door switch and it is compatible with your microwave. The function of the micro switch is to communicate to the electronic con...

Order within the next 9 hrs and your part ships today!
$11.85

Motor, AC Synchronous

If the turntable on your microwave does not rotate, or you can hear a grinding noise, the problem may be with the motor. The motor is typically located below the floor of the oven, and is accessed through the bottom. The motor is normally held in place with a retaining screw and will have two wires attached to it as well. If the motor is making a grinding noise it will need to be replaced. If the motor does not turn, you can check for voltage or continuity with a multi-meter. Make sure the power is disconnected from your microwave before beginning this repair.

Order within the next 9 hrs and your part ships today!
$4.27

Screw,Tapping

Order within the next 9 hrs and your part ships today!
$4.27

Spring

Order within the next 9 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The unit would nothing no lights no controls

  • Customer: James from Tucson, AZ
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I checked the incoming power and main fuse. Both are good.removed the microwave from the wall mount, removed the door and outer cover. Removed the right side panel and replaced the main PCB. I found loose mounting screws for the vent fan and other placecs so I tighten all the hardware I could see. Pluged the unit and found the display said input time and... read more

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

tab was broken off when changing bulb

  • Customer: Shawn from Seattle, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed old cover to lamp and reinstalled the new one by unscrewing one screw and screwing the new one back in read more