Models > LMV1825SB LG

LMV1825SB LG Microwave - Overview

Get Parts and Repair Help for LMV1825SB

If you know the microwave repair part you need, you can browse the list of all parts on the LMV1825SB, or you can search by name or part description. You can also find your part by where it is located on the LMV1825SB by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.06

Light Bulb - 125V 30W

$4.59

Cover,Lamp

$3.06

Switch,Micro

$15.41

Filter,Grease

$15.41

Tray,Glass

$1.96

Screw,Tapping

$6.34

Turntable Assembly

$1.96

Connector Assembly

$62.66

Magnetron

$20.11

Capacitor,High Voltage

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

tab was broken off when changing bulb

  • Customer: Shawn from Seattle WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed old cover to lamp and reinstalled the new one by unscrewing one screw and screwing the new one back in read more

suddenly stopped working while in use

  • Customer: Kevin from Colonia NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
i unplugged the unit,unscrewed the outer shell so that all the wiring and internal components were visible.starting at the first of three micro switches i removed the slip on terminals installed the alligator clips too the wires so the switch would now be bypassed.i made sure the wires and clips were not touching anything plugged unit in and it worked.i then... read more