Models > LMV1635SW

LMV1635SW LG Microwave - Overview

Get Parts and Repair Help for LMV1635SW

If you know the microwave repair part you need, you can browse the list of all parts on the LMV1635SW, or you can search by name or part description. You can also find your part by where it is located on the LMV1635SW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$22.86

Tray,Glass

$3.06

Light Bulb - 125V 30W

$10.52

Filter,Grease

$3.06

Switch,Micro

$8.18

Turntable Assembly

$1.96

Screw,Tapping

$3.06

Holder,Cook Auxiliary

$1.96

Connector Assembly

$6.34

Cable,Assembly

$62.66

Magnetron

Common Symptoms of the LMV1635SW [Viewing 1 of 24]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave worked but did not heat

  • Customer: David from Cathedral City CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I removed the unit from under the cabinet and placed on a counter. I removed the metal covering. I then removed the defective part. The exploded views contained on the site were really helpful and instructive. I then put the unit back in place and powered it back up. read more

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

Microwave operated but did not heat

  • Customer: Donald from Oak Ridge TN
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Initial failure of over range microwave Aug 3rd. Control Panel worked but no heat. Took to local LG authoriaed local repair place. They fixed it quickly and we re-installed it. Worked fine for 2 months then had similar failure again. Agaim took to same authorized repairer. They kept unit for 3 months but finally concluded theu could not fix it and suggeste... read more