Models > LMV1314B

LMV1314B (LMV1314B/01) LG Microwave - Overview

Get Parts and Repair Help for LMV1314B

If you know the microwave repair part you need, you can browse the list of all parts on the LMV1314B, or you can search by name or part description. You can also find your part by where it is located on the LMV1314B by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.09

Light Bulb - 125V 30W

$3.09

Bracket,Idle

$1.96

Connector Assembly

$3.09

Thermostat

$1.96

Fuse,Time Delay

$6.34

Cable,Assembly

$4.59

Lamp,Incandescent

$1.96

Screw,Tapping

$1.98

Thermostat

$3.09

Socket,Lamp

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave operated but did not heat

  • Customer: Donald from Oak Ridge TN
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Initial failure of over range microwave Aug 3rd. Control Panel worked but no heat. Took to local LG authoriaed local repair place. They fixed it quickly and we re-installed it. Worked fine for 2 months then had similar failure again. Agaim took to same authorized repairer. They kept unit for 3 months but finally concluded theu could not fix it and suggeste... read more

Light bulb burned out

  • Customer: Craig from Burke VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I unscrewed the light cover, removed the burned out light bulb and replaced it with one I ordered on Partselect.com. It was very easy. read more

Intermittent loss of power in open and closing door.

  • Customer: David from San Francisco CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Make sure 110v at the transformer. Activate switch controlled by the push button to open and close door. Push in the small metal arm on the switch with none metallic probe. If power is restored to microwave the switch is faulty and need replacement. One switch is not available, the whole 3 switch assemble has to be purchased. read more