Models > LMA1560SB

LMA1560SB LG Microwave - Overview

Get Parts and Repair Help for LMA1560SB

If you know the microwave repair part you need, you can browse the list of all parts on the LMA1560SB, or you can search by name or part description. You can also find your part by where it is located on the LMA1560SB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.09

Switch,Micro

$8.18

Button

$22.89

Motor, AC Synchronous

$1.96

Spring

$3.12

Switch,Micro

$1.96

Fuse,Time Delay

$6.34

Cable,Assembly

$4.59

Lamp,Incandescent

$1.96

Screw,Tapping

$6.34

Lever

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

Carousel would not turn. Small plastic drive shaft broken.

  • Customer: Stan from New Bedford MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Pried cover off bottom-center of microwave. It seems to be either glued or lightly tack welded. Removed 2 small Phillips screws to remove motor. Disconnected electric feed by hand. Don't let go of electric wire or small screws. They will be hard to retrieve from behind the rest of the metal base. Reverse process to install new motor. Didn't try to put small ... read more

The button that opened the door had plastic hooks break off.

  • Customer: John from Minneapolis MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I looked up the part number, with shipping it came to $16, and in one minute of installation time, I just gently pushed the button into the front using the original springs that pushed the button back out, and it just clicked into place, the microwave back in action. read more