The function of the Refrigerator Water Inlet Valve (Triple Solenoid Water-Valve, Water Valve, Water Inlet Valve, Refrigerator Water Inlet Valve Assembly) is to release water from the supply line when ...
This genuine PureSource Ultra water filter will fit most Frigidaire french door and side by side refrigerators. You will find this filter located in the back, top right of the appliance. It is white i...
This screw is used in refrigerators. The screw can be loosened or tightened with a Phillips-head or square-head screwdriver. This screw is used to secure the refrigerator handle to the refrigerator do...
This mullion hinge pin is a genuine OEM replacement part, measuring 1.5 inches by 1.25 inches by 0.85 inches. It is specially designed to secure the mullion in refrigerators, allowing it to pivot and ...
This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes ...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeff
January 20, 2020
The freezer works fine but the fridge temp is 55degrees?
For model number LGHN2844MF0
Hello and thank you for writing.
It certainly sounds like it could be a faulty temperature sensor PS1765215 and/or possibly a faulty evaporator fan motor PS1526073, you should check the part(s) for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
My refrigerator is leaking water on the bottom front on the floor .what is the problem
For model number LGHN2844MF0
Hello Cynthia, thank you for the question. First, you may need to make sure that the water lines are not broken inside the refrigerator. If that is not causing the issue, then the defrost drain tube is most probably clogged with ice or gunk, which may result in the water not draining down the tube. Instead, it collects in a puddle at the bottom of the refrigerator and leaks out the front. Clearing the drain tube usually fixes the problem. If the issue persists, then you may need to check the defrost thermostat, part number PS2378768, since it may not be turning the defrost heater on when required, which results in the freezing of the defrost drain, and hence water keeps collecting at the bottom. If this part is faulty, you may need to replace it. We hope this information helps!
Hello my Frigidaire gallery model number. Jghn2844mfo isn't working properly. The fridge part is to warm and the condenser is frozen solid. I take the panel off in the back and defrost it manually then it works fine for a week or two but then it's frozen solid again. What do you think could be wrong with it? Any help is much appreciated.
For model number LGHN2844MF0
Hi Chuck. It could be a bad defrost heater. Thank you for your question and good luck with your repair.
Hello Patricia, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS6448128. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the
... Read more valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if t
... Read morehe maker dumped the ice into the bin.
pulled fridge from wall, removed card board cover, unplug the fridge. turn the water off to the fridge. remove the water source from fridge first then remove 2 screws that hold the valve. then the wire plugs. hoses.. they were color coded.