This genuine PureSource Ultra water filter will fit most Frigidaire french door and side by side refrigerators. You will find this filter located in the back, top right of the appliance. It is white i...
This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important ...
This screw is used in refrigerators. The screw can be loosened or tightened with a Phillips-head or square-head screwdriver. This screw is used to secure the refrigerator handle to the refrigerator do...
This mullion hinge pin is a genuine OEM replacement part, measuring 1.5 inches by 1.25 inches by 0.85 inches. It is specially designed to secure the mullion in refrigerators, allowing it to pivot and ...
This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes ...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling...
This door gasket is an authentic OEM replacement part sourced directly from the manufacturer for use in refrigerators. The gasket is a flexible strip of gray rubber. It is designed to create an airtig...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William Mowbray
November 27, 2019
Freezer ice make stopped making ice ??? this periodically happens ... catch tub in place .. arm is completely down ... water filter 1 year old .. suggestions ???? thank you !!!
For model number LGHB2867PFCA
Hello William, thank you for your question. That sounds like an issue with the icemaker itself. We would recommend replacing the icemaker itself. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lacy
November 10, 2022
Ice built up under the cooling drawer. Any ideas why? Is there a drain? Also what are the 2 wholes on the bottom of the refrigerator section.
For model number LGHB2867PFCA
Hello Lacy, thank you for contacting us. Mostly the issue is caused by a clogged drain tube. The two holes are for the drain. Please ensure that the drain tube, part number PS11703639, is not clogged and drain trough, part number PS2350588, is not damaged. Please reach out to customer service if you need help placing an order. Glad to be of help!
Is there a part number for the gaskets on both right and left doors?
For model number LGHB2867PFCA
Hello Clark, thank you for contacting us. According to our research, the door gasket, part number PS3408461, fits your model. We hope this information helps!
How do I change the Air Filter in this Frigidaire Gallery
For model number LGHB2867PFCA
Hi Roy, thank you for the question. We have found the instructions to replace the air filter. You may need to follow these steps:
1. Open the air filter door.
2. Remove the old filter and discard it.
3. Unpack the new filter and slide it into the housing.
4. The open face of the filter should be installed facing downward.
5. To close the air filter door, push the top and bottom to lock the door closed.
6. Press and hold the air filter reset button on the control panel for three seconds.
7. When the display changes from replace to good, the status has been reset.
8. The air filter reset will turn itself off after a few seconds.
Glad to be of help!
Was this helpful?
Thank you for voting!
Frank
21 days ago
My refrigerator quit Cooling and the freezer guit freezing
For model number LGHB2867PFCA
Hello Frank, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the inverter board, part number PS12365190, to fix the issue. It supplies voltage to the compressor. We hope this solves your problem!
First I pulled the ice tray out so I could see the solenoid housing/ice tray support(1 unit). Below the ice tray there are 2 screws that hold the solenoid housing/ice tray support. After removing those the assembly lifts up so you can see the wiring harness to disconnect. I pulled it out and removed the 2 screws to open it up. There i
... Read mores 2 screws holding the solenoid in place and one ground wire. This was an easy fix and I know I saved a lot of money.
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension
... Read more to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used
... Read more my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
