Models > LFFN15M5HWB

LFFN15M5HWB Frigidaire Freezer - Overview

Get Parts and Repair Help for LFFN15M5HWB

If you know the freezer repair part you need, you can browse the list of all parts on the LFFN15M5HWB, or you can search by name or part description. You can also find your part by where it is located on the LFFN15M5HWB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the LFFN15M5HWB [Viewing 4 of 4]

$3.86

KEY

$29.14

Hinge Kit

$11.29

Upper Freezer Basket - White

$4.16

Touch Up Paint

This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.

$4.38

SCREW

$6.43

Single Gasket Retainer Clip

Sold Individually.

$29.18

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$68.16

Lid Gasket

$4.26

Drain Plug

$86.82

Inner Door Panel - White

Common Symptoms of the LFFN15M5HWB [Viewing 1 of 36]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

needed baskets for single items

  • Customer: Roberta from Winnfield LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 13 of 18 people found this instruction helpful
I bought the freezer second hand, When I really started using it all the time it was inconvenient for the single items to reach down in three feet of larger frozen items.

I went to a store to see about getting a basket, They told me the next time I was there, get them the model number and they would see what they could do.

I just came... read more

Old panel lid broken and brittle

  • Customer: Michael from Milan TN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 9 of 10 people found this instruction helpful
Removed lid and placed upside down on floor. Pulled plastic retainer clips and removed gasket. Removed old panel. Repositioned new panel and reversed assembly.

Ordered only one spare plastic clip. Too expensive to invest in more. Luckly only broke one of the old clips.

Carefully pulled clips with small claw hammer. read more

Door gasket needed to be replaced.

  • Customer: Arnold from Quincy IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 8 of 10 people found this instruction helpful
I removed all of the expandable pins that held the gasket and the inner door panel, and removed the old gasket from the inner door panel. The new gasket was then placed around the edges of the inner panel. While holding the gasket and panel in the proper location, the expandable pins were inserted into the mounting holes, finishing the installation. read more