Models > LFC25770ST (ASTCLGA)

LFC25770ST (ASTCLGA) LG Refrigerator - Overview

Get Parts and Repair Help for LFC25770ST

If you know the refrigerator repair part you need, you can browse the list of all parts on the LFC25770ST, or you can search by name or part description. You can also find your part by where it is located on the LFC25770ST by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$1.98

STOPPER, DOOR

$19.71

BASKET ASSEMBLY,DOOR

$6.34

Switch,Push Button

$6.34

Cover,Lamp

$1.96

Cam,Shaft

$73.86

TRAY ASSEMBLY,FRESH ROOM

$1.96

Cam,Shaft

$15.41

Lamp,Incandescent

$40.29

Gasket Assembly,Door

$15.41

Case,Display

Common Symptoms of the LFC25770ST [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

icemaker quit

  • Customer: marvin from montgomery TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 4 of 12 people found this instruction helpful
i first replaced valve as the water line hung up and broke the valve as i was moving fridge out,be careful about doing this,now i need to replace icemaker as its not working,ps it wasnt the water valve ,i broke it,so first replaced it now icemaker ,lg stinks for the 2 yrs icemaker has worked,my previous kenmore icemaker thru door worked for 23 yrs and was wo... read more

broken

  • Customer: william from mashpee MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed 1 screw and replaced read more

Interior Light Would Not Turn Off

  • Customer: Thomas from Bay Shore NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Tape off the light button so door alarm does not go off. Take off the clear light shield and remove the light bulbs. Be careful, bulbs may still be HOT!! With Phillips head screw driver unscrew the light plate assy. Drop it down in a comfortable position. Disconnect the connector, unscrew the thermal sensor and remove light assy. Install new light assy into ... read more