Models > LEGC36S9FEA

LEGC36S9FEA Frigidaire Cooktop - Overview

Get Parts and Repair Help for LEGC36S9FEA

If you know the cooktop repair part you need, you can browse the list of all parts on the LEGC36S9FEA, or you can search by name or part description. You can also find your part by where it is located on the LEGC36S9FEA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the LEGC36S9FEA [Viewing 4 of 4]

$32.07

Sealed Burner Head - 14k

$10.20

Medium Burner - 9.5K

$24.68

Top Burner Orifice - 9.5k

$5.29

Igniter/Orifice Mounting Screw

$25.38

Top Burner Orifice - 14k

$40.41

Gas Surface Burner - 12,000 btu

$25.38

Natural Gas Top Burner Orifice - 5,000 btu

$26.25

Burner Head

This burner head is used on gas stovetops. It is located underneath the burner cap.

$137.62

Gas Pressure Regulator

***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.

$31.05

SUPPORT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The burner would not light by itself, and the flame was lopsided.

  • Customer: Roland from Auburn ME
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 8 people found this instruction helpful
The repair was nothing, but the diagnosis was a bit tricky. After carefully looking at the burner head, (cast aluminum) I pretty much figured out that the 4 small cast aluminum bumps that keep the burner cap positioned up in the air the correct amount to allow gas to flow under the cap, were worn down, preventing the gas from exiting properly by the igniter... read more

broken ceramic burner element

  • Customer: Phillip from Saint Simons Island GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 7 people found this instruction helpful
Simple: remove the element by hand and replace new one.

I can't believe how quickly I received my new part -literally next day. read more