This dishwasher door hinge cable assembly connects the door to the spring. The door hinge cable and the door spring apply tension to the door to prevent it from dropping open too quickly. This part co...
$17.90
In Stock
Order within the next 37 mins and your part ships today!
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
The rack roller and axle in your dishwasher allows the dish rack to slide in and out effectively.If you notice that your dish rack is not performing this function, or if one or more of your rack rolle...
$11.76
In Stock
Order within the next 37 mins and your part ships today!
On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water during operation. If you notice your appliance is not draining properly, the circulation pu...
$87.95
In Stock
Order within the next 37 mins and your part ships today!
This is a door gasket for a dishwasher. It creates a watertight seal between the dishwasher door and tub to prevent leaking while the appliance is in use. The gasket is approximately 76 inches long an...
$53.41
In Stock
Order within the next 37 mins and your part ships today!
This is a pump gasket, also known as a pump housing seal, for a dishwasher. The gasket is fitted around the edge of the pump, preventing leakage between the pump housing and the filter housing. Locate...
$12.72
In Stock
Order within the next 37 mins and your part ships today!
This is an accessory assembly, otherwise known as a mounting bracket kit, for a dishwasher. This kit includes two brackets, a hose clamp, and two screws. The brackets are perforated so they can be cut...
Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed.
$56.59
In Stock
Order within the next 37 mins and your part ships today!
This diverter motor, or stepper motor, controls the movement of the spray arms in your dishwasher. It directs water between the drain pump and the spray arms by turning a check valve inside the pump, ...
$40.42
In Stock
Order within the next 37 mins and your part ships today!
This circulation pump filter in your dishwasher traps food and debris, preventing them from entering the wash cycle again. It is often located at the bottom of the dishwasher. If this filter is broken...
$87.51
In Stock
Order within the next 37 mins and your part ships today!
Questions And Answers for LDS4821WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
February 13, 2024
Is it possible to spin the motor shaft by using just your fingers ?it does spin using a drill ..seems it should rotate easier..possibly the le error code issue I'm getting
For model number LDS4821WW
Hi Kevin, thank you for getting in touch. According to our research, the LE error code indicates the locked up circulation pump motor. We would recommend checking the pump impeller assembly, part number PS3528695. It attaches to the motor shaft and rotates to move the water through the spray arm. You may need to replace it to fix the issue. We hope that helps!
Ran the dishwasher in the 15 min cycle with no issues.tried the normal cycle and part of the way through the le code came on .. I heard a clicking sound on the drain assembly side of the washer like it was trying to advance to the next process .the serial number of this machine is 102kwre00182..
Is this dishwasher 13years old ?? Maybe time to upgrade . Lol..
For model number LDS4821WW
Hi Kevin, thank you for getting in touch. According to our research, the LE error code indicates an issue with the water circulation pump motor. We would recommend checking the pump impeller assembly, part number PS3528695. It attaches to the motor shaft and rotates to move the water through the spray arm. You may need to replace it to fix the issue. Your model was manufactured in 02/2011. We hope that helps!
Removed mounting screws from sides of disher. Removed broken piece of connector assy still attached to hinge. Attached new connector assy to hinge then looped it around pulley with spring attached to opposite end. Need both hands to pull spring up to side of tub and connect it. I would suggest replacing both connector assemblies while yo
... Read moreu have the dishwasher pulled out. Push dishwasher back in and mount with screws.
Replacing the spring and connector assembly (the cord had frayed and broken) was easy and took only a matter of minutes to do. Wrestling the dishwasher in and out of its space under the counter was very difficult. Because my kitchen is compact, I had to move the refrigerator first, then disconnect the Romex cable and water lines from th
... Read moree dishwasher before I could pull it fully from under the counter. The side panels have screws in the front and the back, so the appliance had to be moved out until its back was exposed. But I got the job done and the door works just like a new one now!
