Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LDE5004ACW

LDE5004ACW Maytag Dryer - Overview

Get Parts and Repair Help for LDE5004ACW

If you know the dryer repair part you need, you can browse the list of all parts on the LDE5004ACW, or you can search by name or part description. You can also find your part by where it is located on the LDE5004ACW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for LDE5004ACW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.85

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

Order within the next 8 hrs and your part ships today!
$10.18

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit - purchase locally.

Order within the next 8 hrs and your part ships today!
$16.33

Blower Wheel with Clip

This comes with a metallic hub clip to hold it firmly in place.

Order within the next 8 hrs and your part ships today!
$16.63

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

Order within the next 8 hrs and your part ships today!
$18.75

Door Switch Kit

This part replaces older two terminal switches.

Order within the next 8 hrs and your part ships today!
$115.34

Drive Motor - 60Hz 115V

This motor comes with a redesigned motor switch. This part runs at 1/4hp. It performs 1725 revolutions per minute and carries 4.5 amps and 115V.

Order within the next 8 hrs and your part ships today!
$46.28

Tall Baffle

This part moves the clothes around inside your dryer and helps to direct the flow of hot during the drying cycle.

Order within the next 8 hrs and your part ships today!
$4.79

Leveling Leg

Order within the next 8 hrs and your part ships today!

Non-Adjustable Buzzer

$10.25

Screw & Fastener Kit - Front Panel

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The blower fan (nylon) stripped off the motor shaft (steel)

  • Customer: Stephen from Lafayette, IN
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 513 of 513 people found this instruction helpful
Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years. read more

dryer squeeking

  • Customer: gerald from park city, MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 436 of 453 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

Belt broke on old machine.

  • Customer: John from Charlottesville, VA
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 432 of 531 people found this instruction helpful
1. Removed front of machine (2 screws at the bottom).
2. Removed 4 screws from inside the dryer, to take off the blower housing.
3. Removed 4 screws and took out the large metal piece which supports the drum at the front. Removed the drum.
4. Replaced the two rollers that support the drum in the rear. Cleaned the pins they run on, and oiled ve... read more