Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LDE21CS

LDE21CS Maytag Dryer - Overview

Get Parts and Repair Help for LDE21CS

If you know the dryer repair part you need, you can browse the list of all parts on the LDE21CS, or you can search by name or part description. You can also find your part by where it is located on the LDE21CS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for LDE21CS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.


Tumbler and Motor Belt

At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. This belt is all black in color and it is made entirely of rubber.


Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit -...


Roller Shaft

This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.


Blower Wheel with Clamp

This comes with a metallic hub clamp to hold it firmly in place.


Retaining Ring

This metallic retaining ring is less than an inch in diameter. It is made entirely of metal.


Drum Roller Shaft Washer

This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.


Idler Pulley Wheel

This part is used to help the belt to rotate the drum. It is white and made of plastic with a metallic bearing in the center.


Idler Pulley Shaft Washer

This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.


High Limit Thermostat (Limit: 200-30)

This high limit/safety thermostat is used on many of Maytag's brands of gas and electric clothes dryers. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 200 degrees Fahrenheit. The element will kick back in when the temperature drops to 170 degrees Fahrenheit.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The blower fan (nylon) stripped off the motor shaft (steel)

  • Customer: Stephen from Lafayette, IN
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 517 of 517 people found this instruction helpful
Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years. read more

dryer squeeking

  • Customer: gerald from park city, MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 444 of 464 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

Loud rumbling noise on dryer startup

  • Customer: Brian from Mechanicsville, VA
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set
  • 203 of 274 people found this instruction helpful
I searched the internet and found my symptoms really seemed to indicate a problem with the blower wheel, which was very noisy. Feeling confident that was what I needed, I ordered the blower wheel, and also the tumbler belt (the belt was 12 years old). Both parts were genuine Maytag and arrived quickly. Before the order arrived, I went ahead and UNPLUGGED THE... read more