Models > LDE18CT

LDE18CT Maytag Dryer - Overview

Get Parts and Repair Help for LDE18CT

If you know the dryer repair part you need, you can browse the list of all parts on the LDE18CT, or you can search by name or part description. You can also find your part by where it is located on the LDE18CT by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for LDE18CT parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$20.12

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

$14.70

Tumbler and Motor Belt

At 100" in length, this dryer drum belt is 3/8" wide and has 5 ridges. This is the belt that is from the tumbler to the main drive motor.

$5.30

Roller Shaft

This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.

$12.76

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit - purchase locally.

$15.10

Blower Wheel with Clip

This comes with a metallic hub clip to hold it firmly in place.

$16.04

Lint Filter

This white lint filter is a slide-in style type of screen. This filter collects lint as it passes through the dryer vent. Please NOTE: You must be able to read the words "Clean Before Loading". If you cannot read the words, then it will not fit your appliance.

$2.70

Retaining Ring

$2.70

Drum Roller Shaft Washer

This part is sold individually.

$3.96

Idler Shaft Washer

This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color. Sold individually.

$10.54

Idler Pulley Wheel

This part is used to help the belt to rotate the drum.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

noisy rollers, broken latch

  • Customer: gerry from west covina, CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench set, Wrench(Adjustable)
  • 485 of 485 people found this instruction helpful
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to r... read more

The blower fan (nylon) stripped off the motor shaft (steel)

  • Customer: Stephen from Lafayette IN
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 470 of 470 people found this instruction helpful
Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years. read more

electric dryer was rumbling - wheel or belt?

  • Customer: Raymond from West Bend WI
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench(Adjustable)
  • 450 of 527 people found this instruction helpful
Unplugged dryer. Front came off easily. Removed front of blower. Wheel came off fairly easily - could then see that shaft of motor was circular with flattened side but inside of old wheel was rounded. New wheel popped right on. Took tumbler off so I could clean lint out more easily and get a good view of how the belt threaded through. Put the tumbler b... read more