This remote control is a device for adjusting your air conditioner settings. It requires two AAA batteries for operation. A malfunctioning remote control may have unresponsive buttons or signs of phys...
$33.54
In Stock
Order within the next 12 hrs and your part ships today!
This part is a thermistor assembly and it works in conjunction with your room air conditioner. The thermistor is a sensor that attaches to the control board of your air conditioner. Once attached it w...
This is an authentic OEM replacement part sourced directly from LG. This axial fan assembly, also known as a condenser fan, is commonly used in air conditioners. This compact propeller like fan fits o...
$75.81
In Stock
Order within the next 12 hrs and your part ships today!
This control board, also known as a display board, is used for air conditioners. The control board regulates and carries the power to the various air conditioner components. If your control is defecti...
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
$6.37
In Stock
Order within the next 12 hrs and your part ships today!
The installation kit contains the hardware you need to install the room air conditioner in a window. The kit also includes the accordion filler panels, installation brackets and seal.
$80.96
In Stock
Order within the next 12 hrs and your part ships today!
If your air conditioner is not blowing cold air, the problem may be in the capacitor. If the capacitor fails, the compressor will not start and the fan will only blow warm air. The compressor and capa...
$48.41
In Stock
Order within the next 12 hrs and your part ships today!
Took front cover off air conditioner and pulled it a little forward out of the outdoor housing. I then flipped the LED display section out to the left and exposed the patch panel. The next step was to remove the panel with a small screwdriver and disconnect the old thermistor plug. I then plugged in the new one, remove the old one from th
... Read moree grid bracket and placed the new one in. I then replaced everything else in reverse order. I have two LG air conditioners and they both have the same connection setup.