Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUIS15NRHB8 > Parts

KUIS15NRHB8 KitchenAid Ice Maker - Parts

All parts for the KitchenAid Ice Maker KUIS15NRHB8

Below is a list of all parts for the KitchenAid Ice Maker KUIS15NRHB8. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUIS15NRHB8
1-14 of 150
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$136.66

Ice Cutter Grid Complete Assembly

If your freestanding ice maker is not producing ice properly, the ice cutter grid assembly may need replacing. The cutter grid is located within the main unit of the ice maker, and...

$36.88

Thermostat, Bin

This is a bin thermostat made for standalone ice makers to activate the ice maker shut-off when bin is full. It senses how much ice is in the bin to determine if it should produce more ice or activate shut-off. The bin thermostat may need to be replaced if bin is overfilled, underfilled, or not producing ice. Thermistor can be tested with an ohm meter. This part is made of plastic and metal, and is white in color. This is an authentic part sourced from the original manufacturer.

$15.95

Switch, Plunger Grid/Light

The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the do...

$34.76

Ice Cutting Grid Wire

This bake element is placed at the bottom of the oven to supply heat and it has push-on terminals. If your baking element is burnt out, the heat is not consistent, or is defective, then replacing the element could be a solution to your problem. The tools needed for this replacement are: a screwdriver and needle-nose pliers. The first step in is to unplug the range or shut off the house circuit breaker before starting. Unscrew the black of the oven cavity to pull out wires from the defective element. Reconnect wires to the new element and screw it back on. Make sure element is sitting flat.

$91.89

Condenser Fan Motor

NOTE: As per the manufacture the part does not come threaded. A self tapping screw will need to be used to make threads.

$24.48

Evaporator Thermistor

Used with free-standing ice cube makers.

$17.80

Drain Fastener Cap

This is a drain fastener cap and is used in conjunction with your freezer/refrigerator. This model is almost 1.5 inches in diameter, half an inch thick, and is white in color. This...

$207.78

Circulation Pump with Motor

The circulation pump assembly, used in a free-standing ice maker, delivers water from the water tank over the top of the evaporator plate. It does this to form the ice that drops onto the cutting grid. The first step in installing this part is to remove the chute, ice scoop bracket, water pan, and head cap screw that holds the plastic cover over the pump. Refer to the manufacturer-approved installation instructions for further guidance and accuracy. Make sure to disconnect and unplug the ice maker from the power source before installing the circulation pump. Remember to wear gloves to protect your hands.

$5.58

Compression Nut

The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required ...

$4.48

Screw

Sold individually.

$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$3.00

Screw

Sold individually.

$32.86

Tube, Plastic

Used with stand alone ice cube makers.

$13.84

SCOOP

All Parts for the KUIS15NRHB8
1-14 of 150