Models > KUIC15NRTS0 > Instructions

KUIC15NRTS0 KitchenAid Ice Maker - Instructions

All installation instructions for KUIC15NRTS0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the ice maker repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KUIC15NRTS0
91-94 of 94
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Loud condenser fan

  • Customer: Mike from Lake tapps WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Pretty much followed the how to video. Biggest pain was removing the screws to the bracket that houses the motor.

refrigerator on and off

  • Customer: Anthony from Culpeper VA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
as told per compter

Very noisy operation

  • Customer: Mike from Coon Rapids MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed and replaced the condenser motor fan kit. This was a very easy tear down and replacement of a bad component. Removed 4 screws to remove the bracket holding the fan motor kit pulled it out and replaced with the new unit (4 screws supplied) plgged in adapter cord (supplied) and re-installed took about 10 minutes.

My undercounter ice machine grid cutter wire broke

  • Customer: Ronnie from Corpus Christi TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I removed the two screws that hold the shield in front of the grid and put them aside allowing access to the grid. I then removed the two screws that hold the grid in place. I unplugged the connector and then pulled it out. I reversed the process to reassemble and powered up the unit. I now have ice again. This whole process probably took me 15-20 minutes to do the install.
All Instructions for the KUIC15NRTS0
91-94 of 94