Models > KUIA15PRLS4 > Parts

KUIA15PRLS4 KitchenAid Ice Maker - Parts

All parts for the KitchenAid Ice Maker KUIA15PRLS4

Below is a list of all parts for the KitchenAid Ice Maker KUIA15PRLS4. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUIA15PRLS4
1-14 of 145
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.77

Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

$2.70

Screw

Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an appliance to ensure an electrical connection is not lost.

$31.64

Bin Thermostat

Used in stand-alone icemakers.

$122.11

Ice Cutter Grid Complete Assembly

Used with freestanding ice makers.

$23.25

Ice Cutting Grid Wire

There is approximately 10'of wire. Note:2 kits are needed to replace both directions.

$4.70

Compression Nut

$13.55

Light Switch

This part controls the light.

$85.18

Condensor Fan Motor Kit - 115V 60Hz

This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan. Wire harness and hardware are included.

$195.89

Circulation Pump with Motor

Used in freestanding ice-cube makers.

$15.86

Drain Fastener Cap

$69.84

Water Valve

Used with stand-alone ice cube makers.

$6.37

Plastic Tubing Inserts - 4 Included

These inserts are used with 1/4 inch plastic tubing.

$4.74

SCREW

$32.22

TUBE

Used with stand alone ice cube makers.

All Parts for the KUIA15PRLS4
1-14 of 145