Models > KUIA15NRHS4 > Parts

KUIA15NRHS4 KitchenAid Ice Maker - Parts

All parts for the KitchenAid Ice Maker KUIA15NRHS4

Below is a list of all parts for the KitchenAid Ice Maker KUIA15NRHS4. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUIA15NRHS4
1-14 of 136
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Machine Cleaner - 16oz

Nickel Safe Formula. NOTE: This cleaner is used for free-standing ice machines only, not those that are found in your refrigerator.


Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.



Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an ...


Ice Cutter Grid Complete Assembly

Used with freestanding ice makers.


Ice Cutting Grid Wire

There is approximately 10'of wire. Note:2 kits are needed to replace both directions.


Circulation Pump with Motor

Used in freestanding ice-cube makers.


Light Switch

This part controls the light.



Sold individually.


Compression Nut

This compression nut is used with the plastic water line of the icemaker assembly.


Drain Fastener Cap



Sold individually.


Plastic Tubing Inserts - 4 Included

These inserts are used with 1/4 inch plastic tubing.



This is a high temperature adhesive.



Used with stand alone ice cube makers.

All Parts for the KUIA15NRHS4
1-14 of 136