KUDY24SEAL5 KitchenAid Dishwasher - Instructions

Made sure the power and water were not connected to the dishwasher. Removed the bottom panel. Unhooked the old part. Put some plumber's tape around the threads, hooked it all back up. Runs just as good.

Used your video and assembly diagram. Washer works like new now! Had trouble removing the screw from the center of the large black plastic hex nut under the Pump Outlet. Video shows that an adjustable wrench will hold it, but I had to use vise grips. Also needed to use a socket to remove center screw.

Partselect site had pictures of my unit and recommendations as to which parts I needed to correct the problem. The parts came quick, the Partselect videos showed me how to make the repairs and the repairs were quick and easy. Dishwasher seems to be working fine. Thanks,

After watching the repair video I ordered the parts to repair my dishwasher. They arrived quickly and I installed them according to the video. It was so easy and quick. I use the dishwasher about 4 times a week and it is working like a new one. Thanks partselect. You saved me a bundle. H. Cranmer nj

Price of the Kit was better than ordering just the tube from Mfg. Marked old hold downs spots, disassembled, installed hold down then attached spray arm/washer and tube. Two screws to take off but only one screw on install as the hold down had been reenginered. Mark old parts for top or bottom and remember if you turn the rack upside down that will affect the holes on the spray arm.

Excellent service, fast delivery. Recimended...great outfit.

Easy repair. The sprayer arm mount broke. replacing it was a breeze. I found a helpful video on-line. Took about 20 min total.

Job went well only about 10 min to make repair. thanks for the video on repair. I would have ordered one of the seals if I had not watched the video. Thanks Bobbie

This was so easy. I used a screw driver to remove the old arm and mount. The new arm and mount fit together with just one phillips head screw. This then "snapped" into place on the upper dishwasher rack. So glad I only spent the $40 on parts and shipping and did this myself versus the $175 price the repair man was going to charge.

Turned off power to dishwasher. Removed inner door panel. Cut wires as directed and installed new switches. Also installed new spring on soap door opener. Reassembled, ran and tested. Take your time, this repair is pretty simple.

Unscrewed the broken nut and replace the nut with the new one. Even I could do it. Great response from Part Select the part came in the mail quickly. Love the Video on How to replace it. Good Job

Sooooo easy to fix, watched the video, & fixed it in under 15 minutes, all while my husband watched & kept saying, wow, look at you go!!!! You just saved us so much money!!

I used an awl to turn out the broken piece and then screwed in the new nut.

The hardest part was removing the clips to pull out the upper rack. I had to call my husband because my arthritis limits my grip strength. Since he was there I let him use the screwdriver. The whole procedure took about 5 minutes and it's like having a new dw. I really like the rigid delivery tube on this replacement part. The main reason for the problem in the first place was crimping of the tube.

We followed the instructions that were given in the repair video, below the parts that we had ordered. It all went well, and the washer is back on duty. Thank you.