Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDV24SEBL5

KUDV24SEBL5 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDV24SEBL5

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDV24SEBL5, or you can search by name or part description. You can also find your part by where it is located on the KUDV24SEBL5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDV24SEBL5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for KUDV24SEBL5

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$23.97

Middle Spray Arm Kit

This middle spray arm kit includes an upper spray arm, a holder or hanger, water supply tube or delivery tube, split ring seal, and a screw. The function of these parts is to allow...

$6.44

Upper Spray Arm Mount

**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.

$13.96

Wash Arm Bearing Ring

This part will fit between the newer type lower wash arm and the wash arm retainer nut of your dishwasher.

$4.31

Wash Arm Retainer Nut

Use this part to secure the lower spray arm of your dishwasher.

$6.11

Seal, Lower Sprayarm

This dishwasher lower spray arm seal, or under spray arm bearing ring, is designed with the split by the manufacturer. It is not damaged or defective, and is sourced directly from ...

$5.67

Tinerow Clip

This clip attaches the tinerow to the rack. Sold individually.

$4.89

Rubber Washer

The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where...

$44.38

Drain and Wash Impeller Kit

This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper, and installation screw. This part helps stop your dishwasher from leaking and helps with the proper draining of the dishwasher. If you notice that your dishes are not cleaning, the dishwasher is not draining properly, or is making any unusually loud sounds or grinding noises, this could indicate the impeller and seal kit have broken down and need to be replaced. You will need a #15 and #20 torx driver, a small flat-blade screwdriver, 1/4-inch nut driver, adjustable wrench, and a small hammer and a sharp chisel.

$21.53

Lower Door Seal Kit

NOTE: This part requires a silicon sealant for installation.

$17.63

High Limit Thermostat

This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dishes not clean and lower wash arm wobbled.

  • Customer: James from Jacksonville, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 553 of 562 people found this instruction helpful
Completely removed lower wash arm and replaced bearing ring and seal. read more

Not Cleaning lightly soiled items.

  • Customer: Dennis from Cromwell, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 376 of 379 people found this instruction helpful
Removed spray arm thumb nut. Removed spray arm. replaced worn and broken earings and re-assembled in reverse order. Would have done the repair a lot sooner if I had known that PartsSelect was just a few miles up the highway. read more

Water washing out under front door onto floor

  • Customer: Kent from Matthews, NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 177 of 251 people found this instruction helpful
The plastic parts on this spray arm assembly wear with time and the rotation wobble effect creates a wave action in the pool of water at the bottom of the dishwasher. This waves the water onto the front door and forces a leak outside the unit. Replace the lower arm assembly, washer, bearing and nut. They all wear. Also remember to tighten the screws on to... read more