Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDS35FXBL9

KUDS35FXBL9 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDS35FXBL9

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDS35FXBL9, or you can search by name or part description. You can also find your part by where it is located on the KUDS35FXBL9 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDS35FXBL9 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.66

Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.

$14.09

Spinner Kit

This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.

$25.77

Tine Row

Sold individually.

$28.55

Door Latch - Black

NOTE: This part has been redesigned, it may appear different but will still function the same as the original.

$21.91

Tine Row - Kit of 2

$7.20

Touch-Up Paint - White

18ml

$12.72

Drain Hose

This drain hose is 6 and 1/2 feet.

$10.70

Side Mounting Bracket Kit

This mounting kit can be used on solid surface countertops.

$27.29

Impeller and Seal Kit

The impeller threads to the motor shaft.

$46.03

Heating Element

The heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace rack adjusters - wheel were broken

  • Customer: Paul from Encinitas, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 662 of 870 people found this instruction helpful
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake read more

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 453 of 464 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more

broken rollers on upper basket

  • Customer: Walton from Chittenango, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 558 of 835 people found this instruction helpful
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks. read more