Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDS35FBBL0

KUDS35FBBL0 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDS35FBBL0

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDS35FBBL0, or you can search by name or part description. You can also find your part by where it is located on the KUDS35FBBL0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDS35FBBL0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$40.03

Rack Adjuster Kit - Left and Right Side

The rack adjuster connects to the dishrack and is used to change the height of the rack. This kit includes the parts to replace the left and right-side rack adjusters and has been ...

Order within the next 10 hrs and your part ships today!
$21.17

Wheel

The lower dishrack wheel is used in a dishwasher to easily roll rack back and forth on the rails. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. Slide the rack back in the washer to make sure it is installed correctly. Refer to the manual provided by the manufacturer for further instructions.

Order within the next 10 hrs and your part ships today!
$17.53

Door Balance Link Kit

This part is a door balance link kit, also sometimes known as door cable or door spring cable kit, that helps support the door as it opens and closes by connecting to the dishwashe...

Order within the next 10 hrs and your part ships today!
$6.30

Rack Stop Clip

This part goes on the end of the rail to stop the dishrack from falling out.

Order within the next 10 hrs and your part ships today!
$5.07

Tine Pivot

The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. The clip is used to keep the tine row in place in the dishrack. ...

Order within the next 10 hrs and your part ships today!
$17.71

Chopper Assembly

This part chops up/mince the food particles to prevent from clogging the dishwasher pump.

Order within the next 10 hrs and your part ships today!
$11.43

Mounting Bracket

The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher f...

Order within the next 10 hrs and your part ships today!
$31.93

Positioner

Also known as rack adjuster. Sold individually.

Order within the next 10 hrs and your part ships today!
$26.28

Tine Row

The tine row on your dishwasher rack divides the rack into columns to keep your kitchen items in place during the washing cycle. If you notice that one or more of the tines on your...

Order within the next 10 hrs and your part ships today!
$30.09

Drawer Track

Order within the next 10 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace rack adjusters - wheel were broken

  • Customer: Paul from Encinitas, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 736 of 966 people found this instruction helpful
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake read more

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 520 of 534 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more

broken rollers on upper basket

  • Customer: Walton from Chittenango, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 592 of 881 people found this instruction helpful
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks. read more