Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDS30SXSS2

KUDS30SXSS2 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDS30SXSS2

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDS30SXSS2, or you can search by name or part description. You can also find your part by where it is located on the KUDS30SXSS2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDS30SXSS2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.66

Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.

Order within the next 6 hrs and your part ships today!
$13.74

Spinner Kit

This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.

Order within the next 6 hrs and your part ships today!
$25.81

Tine Row

Sold individually.

Order within the next 6 hrs and your part ships today!
$28.59

Door Latch - Black

NOTE: This part has been redesigned, it may appear different but will still function the same as the original.

Order within the next 6 hrs and your part ships today!
$21.68

Tine Row - Kit of 2

Order within the next 6 hrs and your part ships today!
$24.77

FUSE

Order within the next 6 hrs and your part ships today!
$7.22

Touch-Up Paint - White

18ml

Order within the next 6 hrs and your part ships today!
$12.72

Drain Hose

This drain hose is 6 and 1/2 feet.

Order within the next 6 hrs and your part ships today!
$10.76

Side Mounting Bracket Kit

This mounting kit can be used on solid surface countertops.

Order within the next 6 hrs and your part ships today!
$26.94

Impeller and Seal Kit

The impeller threads to the motor shaft.

Order within the next 6 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace rack adjusters - wheel were broken

  • Customer: Paul from Encinitas, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 658 of 863 people found this instruction helpful
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake read more

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 443 of 454 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more

broken rollers on upper basket

  • Customer: Walton from Chittenango, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 557 of 833 people found this instruction helpful
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks. read more