Models > KUDS30IXSS7

KUDS30IXSS7 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDS30IXSS7

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDS30IXSS7, or you can search by name or part description. You can also find your part by where it is located on the KUDS30IXSS7 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDS30IXSS7 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$28.38

Rack Adjuster - Left or Right Side

This adjuster is used to change the height of the upper rack and can be used for either the left or the right size.

$21.19

Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.

$7.62

Mounting Bracket

Sold individually.

$21.09

Postitioner

Also known as rack adjuster.

$22.74

Adjuster Clip

$3.76

Tine Pivot

$3.83

STOP

$22.47

WHEEL

$15.27

Spinner Kit

This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.

$17.82

Chopper Assembly

This chopper assembly chops up/mince the food particles to prevent from clogging the dishwasher pump.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace rack adjusters - wheel were broken

  • Customer: Paul from Encinitas CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 421 of 538 people found this instruction helpful
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake read more

broken rollers on upper basket

  • Customer: Walton from Chittenango NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 427 of 667 people found this instruction helpful
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks. read more

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 293 of 299 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more