Models > KUDS30FXSS1

KUDS30FXSS1 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDS30FXSS1

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDS30FXSS1, or you can search by name or part description. You can also find your part by where it is located on the KUDS30FXSS1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDS30FXSS1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$29.92

Rack Adjuster - Left or Right Side

This adjuster is used to change the height of the upper rack and can be used for either the left or the right size.

$18.96

Door Balance Link Kit

This kit includes 2 door balance links and 2 door balance mounts with wheels.

$9.60

Mounting Bracket

Sold individually.

$24.79

Postitioner

Also known as rack adjuster.

$3.96

Tine Pivot

$27.08

Adjuster Clip

$19.11

Rinse Aid Cap

This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.

$16.04

Spinner Kit

This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.

$4.11

STOP

$3.96

Rubber Washer

Sold individually. Used with the heating element.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broken rollers on upper basket

  • Customer: Walton from Chittenango NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 308 of 445 people found this instruction helpful
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks. read more

Replaced Hinge Link

  • Customer: Scott from Fort Lauderdale FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 235 of 238 people found this instruction helpful
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough. read more

Top rack adjuster on left broke. Wheels part of adjuster

  • Customer: WILLIAM from Middlesex VT
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 192 of 328 people found this instruction helpful
Took apart broke piece and disassembled parts. Ordered new main part but used old clips to reassemble. Part arrived swiftly (2 days), put together and works fine. Saved repair bill and house call. Used screwdriver to pry apart main clip that attached adjuster to top of rack. There were 5 clip type pieces in total and analyzed right hand adjuster as model for... read more