This middle spray arm kit includes an upper spray arm, a holder or hanger, water supply tube or delivery tube, split ring seal, and a screw. The function of these parts is to spray water to all levels...
This upper spray arm mount has been redesigned by the manufacturer, so it not longer requires a clip and screw to be installed. To replace this part, first remove the rack stops from the upper dish ra...
This dishwasher lower spray arm seal, or under spray arm bearing ring, is designed with the split by the manufacturer. It is not damaged or defective, and is sourced directly from the original manufac...
This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper, and installation screw. This part helps stop your dishwasher from leaking and helps with the ...
The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where the heating element...
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of wat...
$55.46
In Stock
Questions And Answers for KUDS25SHBL1
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
HARRY
October 13, 2022
It is leaking below the door not sure if there is a fix?
For model number KUDS25SHBL1
Hello Harry, thank you for your question. According to our research, the issue is probably with the door seal kit, part number PS356593. It seals the gap between the opening to the dishwasher tub and the outer edge of the door and prevents leaking. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
Hi Joseph,
Thank you for your question. The part number for the control panel is PS10064582. You may purchase it on our website or by calling our customer service line and anyone will be happy to assist you. We hope this helps!
Was this helpful?
Thank you for voting!
Ellis
October 19, 2021
Child lock won't turn off by holding the energy saver dry 4 seconds or longer
For model number KUDS25SHBL1
Hello Ellis, Thank you for the question. This could indicate the Control Panel and Touchpad is defective and may need to be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed spray arm thumb nut. Removed spray arm. replaced worn and broken earings and re-assembled in reverse order. Would have done the repair a lot sooner if I had known that PartsSelect was just a few miles up the highway.
The plastic parts on this spray arm assembly wear with time and the rotation wobble effect creates a wave action in the pool of water at the bottom of the dishwasher. This waves the water onto the front door and forces a leak outside the unit. Replace the lower arm assembly, washer, bearing and nut. They all wear. Also remember to tigh
... Read moreten the screws on top of the pump assembly. They loosen and aid in the wobble. Good Luck!