Models > KUDS01FLSS6 > Parts

KUDS01FLSS6 KitchenAid Dishwasher - Parts

All parts for the KitchenAid Dishwasher KUDS01FLSS6

Below is a list of all parts for the KitchenAid Dishwasher KUDS01FLSS6. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUDS01FLSS6
57-70 of 210
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Balance Wheel

Wheel only.



This part is used to cover the chopper blades.


Spring Grip Retainer


Push in Screw Cover

Sold individually.


Hose Clamp

This clamp helps to prevent leaking by holding the end of water hose in place.


Electronic Control Board

The thermal fuse is not included on this part. As per the factory: This is a substituted part and should only have 3 terminals. The P4(Y) terminal has been removed.


Accumulator and Filter

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty...


Feed Tube Assembly with Spinner


Touch-Up Paint - .6fl Ounce - Biscuit


Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".


Spray Arm Manifold

This part supplies water from the pump outlet at the bottom of the tub to the upper spray arm.


Control Panel

Black in color.


Access Panel - Black

This part conceals and protects components located beneath the dishwasher tub.


Water Inlet

This is connected to the water valve, is located on the side of your tub and allows water to enter your dishwasher. ***Note: This part does not include the inlet gasket - must order separately.

All Parts for the KUDS01FLSS6
57-70 of 210