Models > KUDS01DJSS0 > Parts

KUDS01DJSS0 KitchenAid Dishwasher - Parts

All parts for the KitchenAid Dishwasher KUDS01DJSS0

Below is a list of all parts for the KitchenAid Dishwasher KUDS01DJSS0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUDS01DJSS0
57-70 of 205
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Electronic Control Board

The thermal fuse is not included on this part. As per the factory: This is a substituted part and should only have 3 terminals. The P4(Y) terminal has been removed.



This part is used to cover the chopper blades.


Push in Screw Cover

Sold individually.


Spring Grip Retainer


Feed Tube Assembly with Spinner


Access Panel - Black

This part conceals and protects components located beneath the dishwasher tub.


Water Inlet Kit

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the d...


Touch-up Paint - Black



Accumulator and Filter

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty...


Push-In Retainer Clip

Sold individually.



Serves as a mechanical actuator for door switch operation and provides door tension for proper seal.


Spray Arm Tube Hanger


Hose Clamp

This clamp helps to prevent leaking by holding the end of water hose in place.


Upper Dishrack Kit

This kit comes with the tines, clips and cup holder. This kit does NOT include adjusters or rollers. They must be ordered separately.

All Parts for the KUDS01DJSS0
57-70 of 205