Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
If you placed an order on ApplianceHelp.com the order is still valid and you can check on its status and make changes here on PartSelect.com. Click here for more details.
Below is a list of all parts for the KitchenAid Dishwasher KUDS01DJSS0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This kit includes 2 door balance links and 2 door balance mounts with wheels.
This part contains the mounting clips and helps distribute water from the top of the dishwasher tub.
The gasket provides a seal between the tub and the door. The door strike serves as a mechanical actuator for door switch operation and provides door tension for proper seal.
This chopper assembly chops/minces the food particles to prevent clogging of the dishwasher pump.
This spring is located in the door section. Sold individually.
NOTE: This part is no longer available in white or biscuit.
When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.
This part releases the detergent and rinse aid into the dishwasher.
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve will open and close according to the desired amount of water needed.
This part has a closed cast motor housing. The sump housing is sold separately.
Sold individually. Used with the heating element.
This seal is located between the spray arm and the water feed tube.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2014 , Eldis Group Partnership. All rights reserved.